Shopping Cart
Your shopping cart is empty!
![Badger Meter M1000 [M1-050] Electromagnetic Flow Meter w/ 5in Meter Size](https://indomultimeter.com/image/cache/catalog/Products/Badger_M1000-1500x1500.jpg "Badger Meter M1000 [M1-050] Electromagnetic Flow Meter w/ 5in Meter Size")
Badger Meter M1000 [M1-050] Electromagnetic Flow Meter w/ 5in Meter Size
Rp.70.644.200
- Availability:
- 14 - 16 WEEKS
- Product Code:
- M1-050
- Brand:
- Badger Meter
- Update Terakhir:
- 13 May 2017
-
Free delivery
-
Money back guarantee
Badger Meter M1000 [M1-050] Electromagnetic Flow Meter w/ 5in Meter Size. The Badger Meter M1000 electromagnetic flow meter has been specifically designed for industrial water/ wastewater, machinery plants, vehicles and batching process applications. The operating principle of the M1000 electromagnetic flow meter is based on Faraday's law of magnetic induction: The voltage induced across any conductor, as it moves at right angles through a magnetic field, is proportional to the velocity of that conductor. The voltage induced within the fluid is measured by two diametrically opposed internally mounted electrodes. The induced signal voltage is proportional to the product of the magnetic flux density, the distance between the electrodes and the average flow velocity of the fluid.
The M1000 mag meter also has an "empty pipe" detection feature. This is accomplished with a third electrode positioned in the meter between twelve o'clock and one o'clock. If this electrode is not covered by fluid for a minimum of five-seconds, the meter will display an "empty pipe" condition. When the electrode again becomes covered with fluid, the error message will disappear and the meter will continue measuring.
Tags:
- Badger Meter M1000 [M1-020] Electromagnetic Flow Meter w/ 3in Meter Size
- LCD display with programming via 3 buttons
- Minimum conductivity of 5μS/cm: 20μS/cm for demineralized water
- Up to 232 psi (16 bar) nominal pressure
- Fluid temperature depends on material & mounting: Max of 178°F with hard rubber (meter or remote); Max for PTFE is 212°F (meter) or 302°F (remote)
- Uni-directional or bi-directional flow
- Analog output: 0/4 to 20mA; 0 to 10mA
- Pulse output: 2 open collectors; Passive 32VDC; 0 to 100Hz (100mA); 100 to 10,000Hz (20mA); Optional active
- Max frequency output of 10kHz (open collector)
- RS232, RS422, RS485 Modbus RTU communications
- Flow Range: 0.03…12 m/s
- Accuracy: ± 0.3% of reading, ± 2 mm/s
- Conductivity: Min. 5 µS/cm (20 µS/cm for demineralized water)
- Fluid Temperature: With Remote Amplifier: PTFE 302° F (150° C), Hard rubber 178° F (80° C); With Meter-Mounted Amplifier: PTFE 212° F (100° C), Hard rubber 178° F (80° C)
- Ambient Temperature: –4…140° F (–20…60° C)
- Flow Direction: Uni-directional or bi-directional
- Analog Output: 0/4…20 mA / 0…10 mA, flow direction is displayed on a separate status output
- Pulse Output: 2 open collectors, passive 32V DC, 0…100 Hz 100 mA, 100…10,000 Hz 20 mA, optional active
- Frequency Output: Max. 10 kHz (open collector)
- Communication: RS232, RS422, RS485 Modbus RTU
- Empty Pipe Detection: Field-tunable for optimum performance based on specific application
- Min-Max Flow Alarm: Programmable outputs 1…100% of flow
- Low Flow Cutoff: Programmable 0…10% of maximum flow
- Galvanic Separation: Functional 500 volts
- Pulse Width: Programmable 5…2000 ms
- Coil Power: Pulsed DC
- Repeatability: 0.1%
- Display: Two lines x 15 characters (7 on top + 8 on bottom), LCD display
- Programming: 3 external buttons
- Units of Measure: Gallons, ounces, MGD, liters, cubic meters, cubic feet, imperial gallon, barrel, hectoliter and acre feet
- Power Supply: 92…275V AC (50 / 60 Hz), <13 VA optional 9…36V DC, 4W
- Amplifier Housing: Powder-coated aluminium die cast
- Detector Housing: Carbon steel
- Linear Materials: Hard Rubber, PFA, PTFE
- Electrodes Materials: Standard: Hastelloy C
- Grounding Rings: Stainless steel
- Mounting: Detector-mount or remote wall mount
- Approvals: NSF Listed: Models with hard rubber liner 4" size and up; PTFE liner, all sizes
- Cable Insertion: 2 x M 20
- Process Connection: Flange: DIN, ANSI, JIS, AWWA
- Nominal Pressure: Up to 232 psi (16 bar)
- Protection Class: Standard: NEMA 4X (IP67); Optional: NEMA 6P
- Nominal Pressure Up to 232 psi (16 bar)
- Protection Class Standard: NEMA 4X (IP67); Optional: NEMA 6P
- Pollution Degree: 2
- Installation Category: II
- Altitude: 2500 m
- Humidity: 90% R.H. max.
- Electrical Supply: 100…240V AC (±10%). 50/60 Hz, 15 Watts
- NOTE: Mains supply voltage fluctuations are not to exceed ±10% of the nominal voltage supply.
- (1) Badger Meter M1000 Electromagnetic Flow Meter
- (1) Instruction Manual
Brochure/DatasheetDownload
Note: Prices are not binding at any time subject to change without prior notice
Related products
Rp.55.062.500
