• Part Number: ATE2ST
• Model: Standard
• Data logging up to 16k records
• IP65 / NEMA 4X enclosure
• SD memory card slot
• USB interface
• 13 Engineering units of measure
• Large back lit display
• 180 Degree flip display
• Programmable damping
• Switch test function
• Percent error function
• Min/max recall
• Push-button zero adjust
• Tare function
• Hot swap capability of modules
• Onboard 24Vdc loop power supply (non-intrinsically safe version)

• Ashcroft Model: ATE-2
• Dimensions: 8.7 in. (L) x 5.1 in. (W) x 3.8 in. (H)
• Unit Weight (no modules): 2.4 lbs
• Case Material: High-impact PC-ABS
• Enclosure: IP65 / NEMA 4X
• Sensor Module Capacity: Two bays for Ashcroft AM2 sensor modules
• LCD Display: 2.5˝ (W) x 1.5˝ (H); displays three (3) simultaneous measurements, bar graph, back light and  flip-screen capability
• Electrical Connection: 4mm banana jacks – 1 set of test leads included with each ATE-2
• Loop Power Supply: 24Vdc-35mA maximum (non I.S. only)
• Available Engineering Units: psi, in.H2O, in.Hg, ftSW, bar, mbar, kPa, MPa, mmHg, cmH2O, mmH2O, kg/cm2, User Programmable
• Operating Temperature Range: –4 to 120°F (–20 to 49°C)
• Storage Temperature: –4 to 158°F (–20 to 70°C)
• Update Rate: 100ms – 1 module installed; 200ms – 2 modules installed; 300ms – 2 modules installed and external input
• Resolution: ±0.001% span; 99,999 counts
• Warm-Up Time: 5 minutes for rated accuracy
• Electrical Measurements: 0-20mA or 0-30Vdc
• Input: Volt: 0/10 Vdc; Accuracy: ±0.025% fs; Volt: 10/30 Vdc; Accuracy: ±0.10% fs; Volt: 0-20mA; Accuracy:±0.03% fs
• NOTE: For detailed specifications please see Brochure/Datasheet

• (1) ATE-2 Base Unit
• (4) AA batteries
• (1) Test leads
• (1) USB universal AC adapter 100-240 VAC 50/60 HZ
• (1) USB cable
• (1) NIST Traceable Certificate

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice