• Single or dual pressure measurement display
• Digital interface capability via RS232 interface
• Large LCD display
• Programmable damping, zero, engineering unit selection, tare and Min/Max memory
• Pressure Measurement Accuracy: ±0.025%, 0.05%, -0.07%, or 0.1%
• Pressure Measurement Ranges: 0.025" IWC to 10,000 psi
• RS232 Serial communication

• Accuracy: Based on module accuracy.
• Process Connection: 1⁄8 NPT female
• Calibration: NIST traceable Cal Cert included for each pressure module
• Recalibration: Complete recalibration can be accomplished over instrument RS232 interface. Zero and span can be accomplished via front panel keypad.
• Resolution: ±0.002% of span (max.)
• Repeatability:
• ±0.01% of span (all psi ranges)
• ±0.01% of span (ranges of 1 through 200 in. H2O)
• ±0.02% of span (ranges below 1 in. H2O)
• Operating Temp Range: 32°F to 120°F (0°C to 49°C)
• Temp. Comp.Range: 20°F to120°F (0°C to 49°C)
• Temperature Effect: ±0.004% of span per °F over compensated range from reference temperature of 70°F (±3°F)
• Optional Temp. Compensation: Eliminates temperature error from 20° to 120°F (-7°C to 49°C). Available only on PPM2 sensors.
• Storage Temp.: -4°F to 158°F (-20°C to 70°C)
• Media:
• PPT1: Sensor Type: Clean, dry, non-conductive, non-corrosive gas
• PPT2: Sensor Type: Any medium compatible with 316 SS
• Overpressure:
• PPT1 - Low pressure sensors Under/Overpressure capability -15 to 50 psi. Maximum static (line) pressure 100 psi
• PPT2 - Medium/High pressure sensors
• Overpressure capability
• 200% for ranges up to 1000 psi
• 150% for ranges over 1000 psi
• Display: Liquid crystal
• Case Material: High Impact ABS, black
• Power Requirements:
• Standard: ac adapter provided for operation off standard 110 Vac, 60 Hz supply
• Optional: 220 Vac, 50Hz, 100 Vac, Nicad or alkaline battery pack
• Push Button Keypad Functions Include:
• Zero adjust, 12 Standard engineering unit select, Tare function, Min/Max recall, Print, Damping, Port select, Display hold, Dual sensor modes: Add or subtract pressure applied to one module from the second module (differential pressure)
• Field Recalibratable: Yes
• Warm Up:
• 5 min. to rated accuracy
• 30 Min. to complete stability
• Display Size: 2 Line, 0.38˝ height per line
• 16 alpha or numeric characters per line (Max)
• Display Update: 100 ms

• (1) Ashcroft PT-2 Bench-top Pressure / Temperature Calibrator, 220 VAC/50 Hz
• (1) 220 VAC/50 Hz Power cord
• (1) Users Manual
• RTD temperature modules and Probe (ordered separately)

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice