• Part Number: 40027
• True RMS Readings
• Reads in Measurement Indication Units (MIU) up to .005 MIU
• Output Allows Measurement of Peak Current in Non-Sinusoidal Wave Forms
• Let-Go, Reaction, and Burn Hazard Response Networks
• Burn Hazard Network
• Incorporates 3-Special Networks Required by Guidelines
• Detects Dangerous AC & DC Leakage Currents

• Reaction Response Network: 1 MΩ - 10pF
• Let-Go Response Network: 1 MΩ - 62pF
• Unweighted Burn Hazard Response Network: 1 MΩ - 1pF
• Ranges:
• Reaction Response Network: .3, 1, 3, 10 M.I.U.
• Let-Go Response Network: .3, 1, 3, 10 M.I.U.
• Unweighted Burn Hazard Response Network: 0-100 mA RMS
• Meter accuracy: ±2% F.S. @ 60 Hz
• Meter frequency response:
• DC to 1 Hz: Pointer shall track within 5% of peak
• 15 Hz to 200 KHz: ±2% of F.S.
• 200 KHz to 1 MHz: ±2% F.S., ±2% F.S., ±5%F.S.
• Output: 
• Sensitivity: Full scale meter indication equals 1Ω RMS (Measured with a 1 MV, 12 pF load)
• Accuracy: ±2% of reading @ 60 Hz
• Output frequency response:
• Type: 0.52" (13.2mm) Diameter Electret Condenser, Omnidirectional 70° angle of incidence. Maximum sound pressure level 148dB
• Display:
• DC to 1Hz: ±2% of reading
• 50 Hz to 100 KHz: ±2.5% of reading, +2%/-3% of reading, ±2% of reading
• 100 kHz to 1 MHz: ±5% of reading
• Voltmeter:
• Range: 0-300 V (AC or DC)
• Accuracy: DC to 1 Hz: Pointer shall track within 5% of peak
• Accuracy: 20 Hz to 1KHz: ±3% F.S. @ 60 Hz
• Frequency response: DC to 1 KHz
• General:
• Power requirements: (2) 9V (NEDA 1604A) batteries
• Physical: 7" x 5.25" x 3", 2-1/2 lbs (1.4kg), ABS plastic, fused input
• Environmental: 27°C ±2°C, 70% noncondensing relative humidity. Outside this range derate by 10% per °C
• Maximum operating range: 0° to 40° C

• (1) Operator’s Manual
• (1) Test Lead Set: Red and black insulated test probe set. Simpson Part Number 00125.
• (2) Two 9-volt, NEDA type 1604A alkaline batteries

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice