• HANNA Instruments Edge Blu HI-2202 [HI2202-02] Bluetooth Smart pH Electrode and Meter

HANNA Instruments Edge Blu HI-2202 [HI2202-02] Bluetooth Smart pH Electrode and Meter

Not yet rated Write a review
Rp.19.700.000
Availability:
2 - 4 WEEKS
Product Code:
HI2202-02
Brand:
Hanna Instruments
  • Free delivery

  • Money back guarantee

Share

Free yourself from wires when performing pH measurements. Hanna Instruments is proud to introduce edgeblu, a pH meter that uses pH electrodes with Bluetooth® Smart technology (Bluetooth 4.0). These pH electrodes connect wirelessly to edgeblu or a compatible Apple or Android® device running the Hanna Lab App.

The edge blu is thin and lightweight, measuring just 0.5” thick and weighing less than 9 ounces. edge blu has an incredibly wide viewing angle, 5.5” LCD and a sensitive capacitive touch keypad. edge blu is simple to configure, calibrate, measure, log and transfer data to a computer or a USB drive. This meter features Hanna’s exclusive CAL Check™ to warn if the HALO pH electrode being used is not clean or if your buffers are contaminated during calibration. An Indicator is also displayed after calibration showing the overall probe condition that is based on the offset and slope characteristic of the pH electrode.

HALO pH electrodes with Bluetooth Smart Technology
Each edgeblu is supplied with a HI11102 HALO™ Bluetooth pH electrode. The Halo uses Bluetooth Smart Technology (Bluetooth 4.0), which is energy efficient and allows the probe to operate on 1 CR2032 battery for approximately 500 hours. The HI11102 HALO pH electrode is a double junction, gel filled, glass body pH electrode with a built-in thermistor temperature sensor. All readings are automatically compensated for temperature variations.

The HI11102 HALO pH electrode transmits measurement data directly to edgeblu or a compatible Apple or Android device. All HALO pH electrodes are auto-detected providing pH sensor type, calibration data and serial number when connected. The HALO pH electrode also features a blue LED ring that changes flashing frequency based on whether it is in discovery mode or when it is connected to the edgeblu or compatible device. The button located on the HALO™ pH probe is used to place it in discovery mode or to log data directly to the edgeblu or compatible Apple or Android device.

Write a review