Checkline TI-25M-MMX Through-Paint Ultrasonic Thickness Gauge Kit [DISCONTINUED] SEE TI-25MXT

The TI-25M-MMX precisely measures wall thickness of all metals, ceramics, glass and most rigid plastics and the extent of corrosion using ultrasonics. Measurements can be made from a single side!

The TI-25M-MMX has 2 measuring modes: Single Thickness Reading mode which measures the thickness on one point and the Scan mode which measures over a larger measuring area by “dragging” the probe: the minimum thickness encountered during the scan will be displayed then.

The probe of the TI-25M-MMX wall thickness gauge is waterproof and can also be submerged in water. It is ideal to use in tough field conditions because the gauge is impact-resistant and environmentally sealed..

Measuring Range:
Pulse-Echo Mode (Pit & Flaw Detection) measures from 2.54 to 152.4 millimeters.
Echo-Echo Mode (Through Paint & Coatings) measures from 2.54 to 25.4 millimeters (0.1 to 1 inch)

Features:

---

• Ability to measure through paint and eliminate coatings
  
• Resolution of 0.001 inch (0.01 mm)
  
• Large, backlit LCD display retains last reading
  
• CE-Certified
  
• Special-purpose probes are offered for a variety of applications
  
• Switch-selected units for inches or mm
  
• For underwater surveying, probe cable lengths up to 50 feet are optionally
  
• RS-232 output to transfer individual data values
  
• Includes NIST-Traceable Calibration Certificate
  
• IP 65 Rated
  

What's In The Box:

---

• (1) Gauge
• (1) T-102-2700 Probe
• (1) 4 oz. bottle of coupling fluid
• (2) AA batteries
• (1) PC-based Software
• (1) NIST-Traceable Calibration Certificate
• (1) Operating Instruction Manual
• (1) Foam-fitted carrying case.
  

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice