• Part Number: DAS1700-230V
• Power Supply : 99 VAC to 264 VAC, 47 to 63 Hz (80 VA max)
  
• Fast sampling rate: up to 1 MSa/s (1 μs) on each channel
  
• Up to 72 channels (with multiplexed board)
• 4 measurement board types; Universal, Multiplexed, Strain Gauge, High Voltage
• Measure up to 1000 VAC with high voltage board
• Temperature measurements supporting thermocouples and Pt100/Pt200/Pt500/Pt1000 sensors
• CAN, LIN options
• GPS and IRIG timing options
• 16-bit resolution with multiplexed and strain gauge boards
• 14-bit resolution with universal and high voltage boards
• 500 GB SSD internal memory (2 TB optional)
• 16 logic input channels
• WiFi monitoring and control (standard USB WiFi dongle required)
• CAT III 1000 V and CAT IV 600 V
• Wide TFT display with 15.6-inch touchscreen
• USB host and LAN
• Battery option (up to 2 hours)
• Free software for control and analysis
• Rugged carrying case included
• Applications:
  
• Measure and record up to 72 analog channels
• Perform R&D, maintenance, field testing, and process monitoring
• Analyze single or 3-phase power networks

• Power Analysis Function:
• Networks: Single phase, 3-phase, up to 4 networks simultaneously
• Frequency: 50-60 Hz, 400 Hz, 1000 Hz
• Display:  Fresnel diagram, oscilloscope, data
• Measurements: Mean value, RMS, peak, crest factor, THD and DF for voltage & current, active, reactive and apparent power, power factor (ø)
• Harmonics: Calculated up to rank 50, with display and record.
• Input Channels, Alarms, and Power:
• Input Channels (Logic): 16, TTL Maximum Voltage: 24 V, Sampling Interval: 1 μs (1 MSa/s) each channel
  
• Alarm outputs: Alarm A, voltage-free relay contact rating, 24 V 100 mA; B, C 5 V TTL
  
• IRIG Option:
  
• Accuracy: 5 ms
• Sampling Time Accuracy: 10 E -12 (only for sampling rate ≥ 200 µs)
• IRIG Formats: IRIG-A133, A132, A003, A002, B123, B122, B003, B002 and AFNOR NFS 87-500
• IRIG Signal Amplitude Range: 600 mVpp to 8 Vpp
• Input Impedance: 50 Ω
• GPS Option:
  
• Output Accuracy: < ± 100 ns (TCXO, OCXO LQ), < ± 50 ns (OCXO MQ, OCXO HQ)
• Output Frequency: 10 MHz TTL
• Resolution: 100 ns
• Generated Time Codes: B002, B122, B003, B123, B006, B126, B007, B127, IEEE1344, C37.118, AFNOR
• Input Impedance: 50 Ω
• Data Acquisition System:
• Memory Mode: Fastest sampling rate* : 1 MSa/s up to 36 channels, Memory: 128 M words
  
• File Mode (SSD disk streaming) : Fastest sampling rate* :1 MSa/s up to 6 channels, Internal SSD memory: 500 GB (2 TB option)
  
• (*) Universal and high voltage measurement board
  
• General:
  
• Internal Solid State Memory: 500 GB (2 TB optional)
• Operating Temperature : 0 to 40 °C
• Storage Temperature : -20 to 60 °C
• Display : 15.6” TFT LCD 1366 x 768 dots
• Power Supply : 99 VAC to 264 VAC, 47 to 63 Hz (80 VA max)
• Interfaces: 4 USB host ports, VGA, LAN
• Battery (option) : Non removable, Lithium-ion
• Typical Battery Life : 2 hours
• Weight (one card installed) : 17.64 lbs (8 kg)
• Dimensions (W x H x D) : 10.67” x 18.58” x 6.06” (271 x 472 x 154 mm)
• Warranty : 2 Years
• Supplied Accessories: Power cord, 25 pin male connector and backshell, rugged carrying case, bare wire to banana adapters, multiplexed board connectors (12), strain gauge board connectors (6), Stylus, soft wipe, screwdriver, calibration certificate and test report
• NOTE: For complete specifications. Please see Brochure/Datasheet
  

• (1) Instrument
• (1) Power cord
• (1) 25 pin male connector and back shell
• (1) Rugged carrying case
• (1) Bare wire to banana adapters
• (12) Multiplexed board connectors
• (6) Strain gauge board connectors
• (1) Stylus
• (1) Soft wipe
• (1) Screwdriver
• (1) Calibration certificate and test report
• Note: measurement boards sold separately

Brochure/Data Sheet

Instruction Manual

Sefram Pilot for DAS1700 & 8460, Ver. 1.2

---

Display and view recorded data, Ver. 3.7

---

Note: Prices are not binding at any time subject to change without prior notice