Meriam MFT4010 [Z4010-5] HART Modular Multifuction Calibrator

The MFT 4000 Digital Calibrator is a base unit for pressure calibration work with selected NIST traceable sensor modules & integral voltage/current meter. The MFT 4010 Digital Calibrator with HART® is a base unit for modules and full device specific HART® communications. Quick Cal displays HART® PV and AO along with MFT’s NIST traceable measurements. User can identify needed trim(s) and access the trim function(s) from same display. Smart Trim allows selection of analog or digital trims without navigating through menu trees. Documenting included. Documenting memory stores up to 200 HART® configuration files and over 100 calibration results (as-found & as-left data [up to 21 points each], time/date info, tag). Communicate with PC via DB-9 connector.

Available modules include differential, gauge, vacuum and absolute pressure as well as temperature calibration, and voltage/current calibration. A voltage and current meter is integral to the base unit. All HART® field devices can be configured, polled, and trimmed using HART® communications. Device Specific commands for supported devices are included with the MFT.Documenting is included with all models of the Meriam MFT 4000 series modular calibrator. Documenting memory stores up to 200 HART configuration files and over 100 calibration results (as-found & as-left data[up to 21 points each], time/date infor, tag). Communication to a PC is possible via a DB-9 connector.

The Meriam MFT 4000 series modular calibrator is an all-in-one-tool that takes the place of multiple handheld instruments, which simplifies the workload and improves productivity. The Meriam MFT 4000 series supports pressure, t/c, RTD, I/P, P/I, switch, loop and mA/V calibrations for conventional or HART transmitter or local indicators.

A variety of positive-lock measurement modules is available for use with the MFT 4000 series calibrator including, differential gauge, vacuum and absolute pressure as well as temperature and voltage/current. A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled and trimmed using HART communications. Device specific commands for supported devices are included with the MFT series.

The Meriam MFT 4000 series modular calibrator have many features for user convenience. Sensor modules and integral V/I can be re-calibrated for zero, span and linearity. The meter features a 2.1" x 2.1" display, four soft keys (definitions change with mode requirements) and eight hard keys provide the user interface. The display is configurable for 1 to 4 simultaneous measurements. Other features include auto shut off, damping, min/max value capture, display hold, sensor zero and direct contrast adjustment.

The MFT 4010 is a break-through combination calibrator/HART communicator that truly reduces the time spent on field calibrations. The MFT 4010 delivers the versatility of a calibrator and the convenience of HART communications in one handheld unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured by the NIST traceable MFT.