×
Multiple Product

have been added to your cart

There Are items in your cart.

Cart Subtotal: $xxx.xx

Go to checkout

AEMC CA7027 [2127.84] Fault Mapper Pro Telephone Cable Tester/Graphical TDR

Not yet rated Write a review
AEMC
Rp.30.795.680
Availability:
4 - 6 WEEKS
Product Code:
2127.84
Brand:
AEMC
Update Terakhir:
19 Mar 2024

  • Free delivery

  • Money back guarantee

Share

AEMC CA7027 [2127.84] Fault Mapper Pro Telephone Cable Tester/Graphical TDR. The Fault Mapper Pro® Model CA7027 is a hand-held graphical TDR (Time Domain Reflectometer) designed for identifying and locating faults on power and communication cables, given access to one end only. The Fault Mapper Pro® measures cable length and indicates the length and distance to cable faults to a range of 9 ft (3 m) to 19,000 ft (6000m) on virtually any type of cable. It injects a series of pulses into the cable under test. The velocity at which the pulses travel is determined by the type of cable, which is known as the velocity of propagation (Vp) of the cable. The Velocity of Propagation (Vp) is adjustable between 1% and 99% enabling accurate calibration to the cable under test. The Vp value is expressed as a percentage of the speed of light (e.g. 67% or ft/mtrs/micro-second), this value will vary according to the type of cable under test. The Fault Mapper Pro® can accept user selectable values between 1 and 99% (or the equivalent value in feet or meters per micro-second). Based on the selected Vp and the time taken for the pulses to travel through the cable, a reflection profile of the cable under test is displayed. An adjustable cursor assists in locating faults and termination. The Fault Mapper Pro® incorporates an oscillating tone tracer, which is detectable with a standard tone tracer, for use in the tracing and identification of cable pairs.


  • Part Number: 2127.84
  • Hand-held Graphical TDR (Time Domain Reflectometer)
  • Detects opens, shorts, taps, faulty taps, bridge taps, splitters, high resistance, wet cables, splices and more
  • Identifies impedance mismatches
  • Indicates cable faults and terminations up to 11,700 ft (3500m) in feet or meters
  • Works with twisted pair, parallel and coaxial cable
  • Selectable cable impedance (50Ω, 75Ω, 100Ω)
  • Over-voltage protection up to 250V
  • Adjustable cursor assists in locating faults and termination
  • Built-in tone generator for tracing and locating cables
  • Auto-Ranging scale
  • Large high-visibility blue electroluminescent backlit display
  • CE Mark

                      • Range (@ Vp=70%): 23, 49, 98, 197, 394, 820, 1640, 3280, 6560, 9850, 19000 ft (manual range control)
                      • Accuracy: 1% ± of Range
                      • Resolution: Approximately 1% of selected range
                      • Minimum Cable Length: 1.5 ft (0.5m)
                      • Velocity of Propagation (Vp): Adjustable from 1 to 99%
                      • Output Pulse :  5V (peak to peak) into open circuit
                      • Output Impedance: 25, 50, 75, 100Ω (selectable)
                      • Scan Rate: 2 scans/second or scan held
                      • Display Resolution: 128x64 pixel graphical LCD
                      • Backlight: Blue electroluminescent
                      • Tone Generator: Oscillating 810 to 1110Hz
                      • Tone Receiver/Cable Tracer: Model TR03- Available as an accessory (not included)
                      • Voltage Protection: 250VAC
                      • Power Source: 4 x 1.5V AA alkaline batteries (included)
                      • Auto Power Off: Selectable 1 ,2 ,3, 4 minutes or disabled
                      • Dimensions: 6.5 x 3.5 x 1.5” (165 x 90 x 37mm)
                      • Weight: 12 oz (350g)
                      • Operation Temperature: 14 to 122°F (-10° to 50°C)
                      • Storage Temperature: -4 to 158°F (-20 to 70°C)
                      • Ingress Protection (IP) Rating: IP54
                      • EMC: EN 61326-1
                      • Safety Compliance:IEC 61010-1, EN 60950

                      • (4) AA batteries
                      • (1) 4mm color-coded banana plugs with alligator clips
                      • (1) Soft Carrying Case
                      • (1) Instruction Manual

                          Download

                          Note: Prices are not binding at any time subject to change without prior notice

                            Options 0 Item Selected
                          Image
                          Model
                          Product Name
                          Price
                          Available
                          Quantity
                          AEMC CA7027 [2127.84] Fault Mapper Pro Telephone Cable Tester/Graphical TDR
                          2127.84
                          Rp.30.795.680
                          4 - 6 WEEKS

                          • National Delivery

                            FREE SHIPPING for all provinces of Indonesia

                          • Safe Payment

                            Using the most secure payment methods

                          • Customer Protection

                            From click to delivery.

                          • 24/7 Help Center

                            Proffessional assistance for a smooth shopping experience.

                          PT. Indomultimeter Test Instruments

                          Mall WTC Matahari Serpong UG Fl. U10 Tangsel Banten Indonesia

                          (+62.21) 53167044
                          sales@indomultimeter.com