Delta Ohm HD32.7 Temperature Data Logger - 8 Inputs

HD32.7 - 8 INPUTS DATA LOGGER FOR Pt100 Pt1000 SENSOR PROBES

The HD32.7 is a data logger that can capture, log and then send to a PC or serial printer the data coming from 8 temperature probes connected to the inputs. All 8 inputs are simoultaneosly displayed. The probes can be Pt100 with SICRAM module, direct 4-wire Pt100 or direct 2-wire Pt1000. All the connected probes must be of the same type. The captured data can be displayed and processed on the PC using the DeltaLog9 software. The instrument has a total capacity of 96.000 acquisitions for each one of the 8 inputs. Storage can be managed in two ways: when the available memory is full, data are overwritten by starting from the oldest ones (circular memory), otherwise storage stops when the available memory is full. Maximum, minimum or average of the stored values are calculated.

HD32.7. 8 input datalogger instrument for Pt100 sensor temperature probes equipped with SICRAM module. Storage interval selectable between: 1, 5, 15, 30 s - 1, 2, 5, 10, 15, 30 min or 1 hour. Memory capacity: 96,000 samples, each one of all 8 channels. Functions: CLOCK, RELATIVE, MINIMUM, MAXIMUM, MEAN MEASUREMENT. Simultaneous display of measurements on all the eight inputs. RS232C and USB1.1-2.0 serial interface. The instrument firmware can be updated by PC. The instrument allows centesimal temperature measurements in the range: -199.99…+199.99 °C and decimal in the range +200…+650 °C. Power supply: four 1.5V batteries type C, 12 Vdc socket for external power supply. The KIT includes: instrument HD32.7, four 1.5 V alkaline batteries type C, instruction manual and support/transport strap. The probes, tripod, carrying case and cables have to be ordered separately. Includes DeltaLog9 software downloadable from Delta OHM website.