Thermo Scientific Orion AQUAfast COD165 Thermoreactor

The NEW Thermo Orion COD165 thermoreactor will hold 25 round glass vials with 16mm external diameter. It is designed for sample preparation in determining COD, total phosphorus, total nitrogen, total chromium and other parameters in water and sludge analysis. The Thermo Orion COD165 thermoreactor, paired with the Thermo Orion COD reagents and the Thermo Orion AQUAfast AQ4000 advanced colorimeter or Thermo Orion AQUAfast AQ2040 colorimeter, provide the user with a complete analytical setup for COD analysis. The Thermo Orion AQUAfast AQ3700 colorimeter also performs COD analysis, as well as nitrogen and phosphate digestion methods.

The COD165 thermoreactor is designed to be highly resistant to chemical and mechanical corrosion. The heating block that holds the COD vials allows for very good thermal homogeneity at the selected temperatures. The temperature of the heating block is microprocessor controlled. The Pt100 temperature probe does not require any calibration, because when the instrument is turned on, a self test is performed.

The COD165 thermoreactor is equipped with a voltage selector for either 115 V or 230 V. It is accessible on the rear panel of the instrument. Always check the voltage setting before plugging the instrument into a power outlet.

This thermoreactor offers additional digestion temperature ranges which meet the COD and other digestion method requirements around the world. The temperature settings are 100, 120, 150, 160 and 165 degrees Celsius. The 160 C and 165 C are new. They are used for faster COD digestion methods where the digestion takes only 30 minutes!

The heating block is equipped with over-temperature protection by a thermostat, which turns off heating when the temperature exceeds 180 C. Ideal for environmental and wastewater monitoring. Temperature settings of 100, 120, 150, 160 and 165 degrees Celsius.

Program for automatic shutoff with preset times of 30, 60, and 120 minutes or use continuous temperature mode for manual temperature control.

Automatic selection of voltage from 90-260 V and frequency from 50-60 Hz with appropriate power cable for US/Canada, EU, and China (included).