• Part Number: 3086910
• Dual displays – permits simultaneous reading of amperage and voltage
• True-rms for precise measurement results
• New thin jaws, 5mm thinner than others to access tight measurement spaces
• Micro Amps measurement for testing flame sensors
• Capacitance to 3000 µF
• Temperature with K-type thermocouple probe
• AC and DC Voltage to 600V
• Resistance to 40MΩ
• AC Current to 600A
• Frequency measurement
• Diode test and continuity buzzer
• Hold and maximum reading functions
• In rush current
• Accommodates conductors up to 28 mm (1.1) in diameter

• Display: 3-3/4 digits 4000 counts, dual LCD displays
• Update Rate: 3 per second nominal
• Polarity: Automatic
• Low Battery Indication: Below approx. 2.4V
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Relative Humidity: Maximum relative humidity 80% for temperatures up to 31°C (88°F)
•  decreasing linearly to 50% relative humidity at 40°C (104°F)
• Altitude: Indoor operation below 2000m (6,562 ft)
• Storage Temperature: -20°C to 60°C (-4°F to 140°F), < 80% R.H. (with battery removed)
• Temperature Coefficient: Nominal 0.15 x (specified accuracy)/°F @ 0°C - 18°C or 28°C - 40°C (32°F -64°F or 82°F - 104°F), or otherwise specified
• Sensing: Average sensing for ACD-14 PLUS
• Power Supply: Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032).
• Battery Life: 95 hours approx. (in DCV mode)
• Power Consumption: 2.5 mA typical for ACD-14 PLUS
• Low Battery Indication: Below approx. 2.4V (battery symbol appears in upper right)
• Auto Power Off: After being idle for 30 minutes
• APO Consumption: ACD-14 PLUS: 0.8µA typical except 25µA typical for temperature function
• Safety: CE EN61010-1, EN61010-2-032 - Pollution Degree 2
• Transient Protection: 6.5kV (1.2/50µs surge) for all models
• E.M.C.: Meets EN61326
• Overload Protections: ACA Clamp-on jaws: AC 600A RMS continuous “+” & “COM” terminals (all functions): 600VDC/VAC RMS
• Dimension: L190mm X W 63mm X H 32mm (L 7.48” X W 2.48” X H 1.25”)
• Weight: 204 g (0.450 lb approx.)
• Jaw opening &
• Conductor diameter: 28 (1.1”) max
• Note: For complete specifications please see Brochure/Datasheet
  

• (1) ACD-14 TRMS-PLUS clamp meter
• (1) Set of test leads
• (2) Batteries (installed)
• (1) Soft carrying pouch
• (1) Type-K thermocouple with banana plug
• (1) Instruction Manual

 Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice