The BK Precision 603B 6V and 12V Handheld Battery Capacity Analyzer with Record Storage is a handheld battery capacity analyzer that can test 6 and 12 volt sealed lead acid batteries with capacities up to 100 ah. Test results include voltage, state of charge, and internal resistance. This analyzer also features a built-in USB port and internal memory to store battery information, test configuration, and measurement results for up to 50 batteries. The 603B analyzer is an ideal choice for testing sealed lead acid batteries commonly used in intrusion detection, fire alarm, security camera, access control, industrial control, and other battery backup systems.
Fast test cycle time for quick sorting of batteries
Measurements are stored to internal memory
Pre-load up to 50 test configurations from a computer via USB
Test configurations include site, panel, battery information
Export record data to a CSV file for further analysis
Twist-lock test leads can be changed in seconds
Displayed:
Quick Test Mode:VO: Voltage open; VL: Voltage loaded; IR: Internal resistance; SOC: State of charge percentage; RS: Resistance status, pass/fail user configured
Record Mode: VO: Voltage open; VL: Voltage loaded; IR: Internal resistance; SOC: State of charge percentage; SOT: SOC table used for test; Tmp: User provided temperature
RS: Resistance status, pass/fail user configured
Recorded:
Data:
Rec: Record number
Dat: Date
Tme: Time
Bld: Building
Loc: Location
Typ: Type of system
Ser: Battery serial number
Mfd: Battery manufacturer or in-service date
Tmp: User provided temperature
V: Battery voltage (as labeled)
Ah: Battery ampere hour (as labeled)
VO: Voltage open
VL: Voltage loaded
RC: Remaining capacity (SOC)
NIR: Nominal internal resistance used for test
IR: Measured internal resistance
OCV: Open charger voltage
LCV: Loaded charge voltage
WEI: Weighting state during test, Y or N
SOT: SOC table used for test
SOV: SOC voltage used for test
Accuracy:
Voltage: 0.2% ±10 mV
Current: 0.2% ±10 mA
Resistance (IR): 5% ±1 mΩ
Range:
Open voltage: 5.5 V to 30 V
6 Volts: Battery test: 5.5 V to 6.8 V
Charge circuit test: 5.5 V to 8.5 V
12 Volts: Battery test: 8 V to 14 V
Charge circuit test: 8 V to 17 V
24 Volts: Battery test: N/A
Charge circuit test: 16 V to 28 V
Current: 1 A to 10 A
Resistance (IR): 1 mΩ to 100 mΩ
Setting:
Voltage (record mode): 6 V, 12 V
Ah (record mode): Ah – 100 Ah in 1 A steps
Current (load test mode): 0.5 A to 10 A in 0.5 A steps
Time (load test mode): 0.5 sec to 5 sec in 0.5 sec steps
Nominal Internal Resistance (NIR): N/A, 0.1 mΩ to 199 mΩ
Temperature (record mode): User settable
Real Time Clock: √
Data Time Log: √
Cycle Time: ≤ 5 seconds, typical
Battery Load current: 0.1 C based on Ah value entered by user
SOC tables: 2 default tables, one for 6 and one for 12 V; 3 user configurable tables for 6 V; 3 user configurable tables for 12 V
Battery Charger Circuit Test 6, 12 or 24 Volt Charger Circuits:
Quick Test mode: Measurement data isdisplayed but not recorded
Record mode: Records open and loaded charger circuit voltage
Pass / Fail: Optional, calculated based on user provided NIR
General:
Internal Memory: 50 records
Minimum Operating Voltage: 5.5 V
Minimum Operating Current: 0.45 A with back light on, typical
Display: 20 x 4 LCD with back light
Remote Communication: USB Cable (type B)
Test Leads Type: Detachable
Storage Temperature: -10º C to 70º C
Dimensions (W x H x D) 2.91” x 10.44” x 2.28” (74 x 265.1 x 58 mm)
Weight: 2.65 lbs (1.2 kg)
Warranty: One year
(1) 603B - 6V and 12V Handheld Battery Capacity Analyzer