• Part Number: 4994398
• Multiple tracing modes allow you to locate and trace energized and de-energized utilities in several applications
• Intuitive Transmitter automatically chooses correct locating function based on connected accessory and includes selectable 8/33 kHz frequencies
• Receiver's high-contrast display allows for clear viewing in full sunlight and features automatic backlight for shaded and dark areas
• Rated CAT IV 600 V, ensuring safety when working with energized cables
• Semi-automatic gain control quickly detects tracing signal and allows precise adjustment of receiver sensitivity
• Accurate depth measurement to 20 ft
• Rugged, durable construction
• Water and dust resistant to IP54
• Drop proof to 3.28 ft (1 m)
• Signal Clamp induces signal without making electrical contact
• Ground fault locating with optional A-Frame accessory (AF-600)
• Comes as complete kit, ready for use
• Three testing modes:
• Passive power mode (50/60 Hz) - Tracing energized lines conducting current (no Transmitter necessary)
• Passive radio mode (RF) - Using surrounding radio waves to trace underground utilities (no Transmitter necessary)
• Active mode - Using UAT-600-T Transmitter
• Three active modes with UAT-600-T Transmitter:
• Induction - Transmitter will automatically start to radiate signal around it with internal antenna, used for tracing individual cables where there is no access to line to connect test leads or clamp
• Direct connection with test leads - Most reliable method to trace individual cable or pipe
• Clamp - Provides efficient and safe method of applying locate signal to cable, where it is not possible or safe to gain access to cable for making electrical contact
• Main applications:
• Locate energized 50/60 Hz cables carrying current
• Identify location of all metallic utilities, pipes* or cables (energized or de-energized)
• Trace individual pipes* or cables (energized or de-energized)
• *Tracing of non-metallic pipes and conduits is possible after inserting metal fish tape or cable
• Special applications:
• Two frequency options: 8 kHz and 33 kHz
• Locate non-metallic pipes and sewer lines
• Take depth and current measurements
• Measure voltage, resistance and output current
• Advanced locating with two people
• Locate ground faults with the AF-600 A-Frame accessory

• AF-600 A-Frame:
• Tracing mode (de-energized): 8 kHz
• Locating mode: Ground fault locating
• Sensitivity (typical): Cable locate mode at 1 meter depth: 10 uA
• Fault locate mode: up to 2 MΩ fault
• Display backlight: Automatic
• Audio indication: Speaker indicates left/right by pulsed/continuous tone
• Compatible transmitter: UAT-600-T Transmitter
• Display: 1.28 in, 128 x 128 BW outdoor LCD display with auto backlight
• Update rate: Instantaneous
• Operating temperature and humidity: -4 °F to 122 °F (-20 °C to 50 °C), ≤90% RH
• Storage temperature and humidity: -40 °F to 140 °F (-40 °C to 60 °C), ≤90% RH
• Operating altitude: < 6561 ft (< 2000 m)
• Pollution degree: 2
• Water and dust resistance: IP54
• Drop proof: 3.28 ft (1 m)
• Power supply : (6) 1.5 V AA alkaline batteries
• Auto power off: 15 minutes idle
• Battery life: Approx. 60 hours at 70 °F (21 °C) (Typical)
• Size (H x W x L): Approx. 14 x 9 x 4.7 in (355 x 230 x 120 mm)
• Weight: Approx. 4.2 lb (1.9 kg) (batteries installed)
• SC-600 Signal Clamp:
• Measurement category: CAT IV 600 V
• Operating voltage/current: 0 to 600 V, 100 A max.
• Operating frequency/tracing modes: 33 kHz and 8 kHz
• Signal voltage output (nominal): "23 V rms at 8 kHz; 30 V rms at 33 kHz"
• Operating temperature and humidity: -4 °F to 122 °F (-20 °C to 50 °C), ≤90% RH
• Storage temperature and humidity: -40 °F to 140 °F (-40 °C to 60 °C), ≤90% RH
• Operating altitude:  < 6561 ft (< 2000 m)
• Pollution degree: 2
• Water and dust resistance: IP54
• Drop proof: 3.28 ft (1 m)
• Size (H x W x L): Approx. 11.6 x 7.1 x 1.4 in (295 x 180 x 37 mm)
• Weight: Approx. 1.9 lb (0.85 kg)
• TL-UAT-600 Test Leads Kit:
• Measurement category: CAT IV 600 V
• Operating voltage and current: Test leads: 600 V, 10 A max.; Clips : 600 V, 10 A max.
• Leads length: 11.5 ft (3.5 m)
• Compatible transmitter: UAT-600-T Transmitter
• Operating temperature and humidity: -4 °F to 122 °F (-20 °C to 50 °C), ≤90% RH
• Storage temperature and humidity: -40 °F to 140 °F (-40 °C to 60 °C), ≤90% RH
• Operating altitude: < 6561 ft (< 2000 m)
• Pollution degree: 2
• Water and dust resistance: IP54
• Drop proof: 3.28 ft (1 m)
• Size (H x W x L): Approx. 9 x 3.5 x 3.1 in (230 x 90 x 80 mm)
• Weight: Approx. 1.1 lb (0.5 kg)

• (1) UAT-600-R Receiver
• (1) UAT-600-T Transmitter
• (1) CC-UAT-600 Carrying Case
• (1) TL-UAT-600 Test Leads Kit
• (2) FP-UAT-600 Replacement Fuse
• (6) 1.5 V AA (IEC LR6) Batteries (Receiver)
• (8) D-Cell Batteries (Transmitter)
• (1) SC-600 Signal Clamp
• (1) User Manual
• (1) Quick Reference Guide

Brochure/Data Sheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice