Global Water SP200 [CJ0000] Variable Speed Water Sampler

The variable speed portable peristaltic pump sampler is ideal for sample removal from shallow wells and surface water, including lakes, ponds, and holding pools. The water sampler is lightweight, rugged, easy to use, weather resistant, and requires minimal maintenance. The peristaltic pump is designed to take a manual sample and has the ability to back flush the sample hose once you are finished taking the sample.

Power
The water sampler operates using an external 12 volt DC power source that can supply at least 2 A continuous. The variable speed motor is reversible and can sample at any speed from a trickle up to 500 ml per minute. A power cord, 10 ft (3.05 m) long, is included with each variable speed peristaltic pump sampler. The power cord is fitted with alligator clips for easy connection to almost any 12 volt DC battery, such as a car battery or a small 12V, 5 AH gel cell.

Sampling
To provide high sample integrity, the water sample only contacts the norprene and polyethylene tubing. The tubing is easily cleaned or replaced. To avoid cross contamination or lengthy decontamination procedures simply change the inexpensive tubing between samples. 

Features:

• Easy interface with speed control for exact sample size with no spilling
• Reversible motor for back flush of sampling hose.
• Sample at any speed up to 500 ml per minute rate at 4 foot head
• Lightweight, rugged, and weather resistant enclosure
• 15 ft pickup hose with strainer provided 
  

What's In The Box:

• (1) Variable Speed Portable Sample Pump
• (1) 15’ pickup hose
• (1) 10’ Battery Cable (Inside Enclosure)
• (1) SP200 Manual
• (1) 12 volt battery (Not included)
  

Brochure/Datasheet

Instruction manual

Note: Prices are not binding , subject to change without prior notice