Multi-purpose temperature probe measures temperature of air, soil or water. Use with a Sensor Transmitter or EnviroMonitor Node.
Compatible wiith the Davis Wireless Sensor Transmitter (6332). Can also be used to replace the inside temperature sensor on wireless Weather Envoy (6316), Envoy8X (6318), wireless Vantage Connect (6621, 6622).
The Wireless Weather Envoy, Envoy8X and Wireless Vantage Connect come with an “inside” temperature sensor. Since the Vantage Connect is mounted outside and the Envoys can be mounted outside in a shelter, this temperature sensor can be replaced with a temperature probe that can be used for measuring the temperature of air, water, or soil.
Measures temperatures as low as -40°F (-40°C) and as high as 150°F (65°C). Features an electronic sensor sheathed in stainless steel. Comes with a 25-foot (7.6 m) cable.
Multi-purpose temperature probe measures temperature of air, soil or water. Use with a Sensor Transmitter or EnviroMonitor Node. Can also be used with Weather Envoy or Vantage Connect to replace the “inside” temperature sensor.
Features an electronic sensor sheathed in stainless steel. Comes with a 25-foot (7.6 m) cable.
General:
Sensor Type (see Charts) : Platinum wire thermistor
#Time Constant:
In Still Air : 100 seconds
In Liquid : 28 seconds
Attached Cable Length : 25' (7.6 m)
Cable Type : 4-conductor, 26AWG
Recommended Maximum Cable Length (see Note 1) : 200' (61 m)
Note: There is no absolute maximum cable length. Increasing the cable length above the recommended maximum length causes an increased measurement error at a rate of approximately +0.24°F (+0.13°C) per 100' (30 m) of 22 AWG cable. See Figures 1 and 2, on page 2.