The Instek PEL-2004A is a multiple channel programmable DC Electronic Load with a modularized structure. It is a 4-slot mainframe with a master control unit to hold 4 load modules. When the Instek PEL2004A is configured with 4 load modules rated at 350W each, the PEL-2004A is able to sink up to 1.4kVA of power. This product is designed to meet the test requirements of high-speed semiconductor devices in the market today. The PEL-2000A Series includes two types of mainframes and 4 types of load modules to accommodate users' requirements in a flexible manner. Any load module combination can be used with a mainframe to tailor a test system based on the number of channels, and the maximum load power, voltage and current of each channel. Multiple loads can be connected in parallel to provide a higher-power load to test higher power supply outputs. This flexibility significantly makes the PEL-2004A a very cost-effective instrument for testing a broad range of power supply outputs.

The Sequence function allows each channel to change load following a pre-defined arbitrary waveform sequence at a selectable speed up to 100μs per step. Further more, every channel can proceed with its respective arbitrary waveform sequence and work together with others under a clock control to provide multi-channel actual-device simulation. This is one of the most powerful features of PEL2004A to simulate the load operations of a multi-output power supply. Under Dynamic mode, the load current or load resistance bounces up and down between two preset levels at a selectable speed up to 25μs per step. This provides standard test procedures for the verification of a power supply’s response to very quick load changes.

The PEL-2004A provides USB Host/Device and RS-232 interface as standard and GPIB optional for external control and system configuration.All the load channels in a PEL-2004A mainframe can be connected in parallel to perform any combination of static or dynamic loading. Under Dynamic mode, the load current or load resistance pulses between two preset levels at a predefined speed of up to 25μs per step. When the channels are connected in parallel, dynamic tests are synchronously clocked. The ability to perform parallel dynamic loading gives you the flexibility to perform dynamic tests to high-power power supplies without the need for a dedicated high power electronic load.

The Instek PEL-2004A allows multiple mainframes to be linked together with standard MIL 20-pin connectors to provide higher power load capacity. A maximum of 5 mainframes, including one master and 4 slaves, can be chained together to give a 7kW load capacity for high current and high power applications.

Under "Program" mode, up to 12 programs each with 10 panel setup memories, can be edited to create work routines for repetitive tests. After a program has completed, the results of all test steps, including the Go/NoGo judgments will be shown on the screen. Up to 12 programs with a total of up to 120 panel-setup memories can be chained together to be run one after the other.