• Besantek BSTET19 [BST-ET19] Ground Resistance Clamp Tester, 30A, 32mm Diameter Clamp

Besantek BSTET19 [BST-ET19] Ground Resistance Clamp Tester, 30A, 32mm Diameter Clamp

Not yet rated Write a review
BESANTEK
Rp.31.644.768
Availability:
4 - 6 WEEKS
Product Code:
BST-ET19
Brand:
BESANTEK
Update Terakhir:
13 May 2017
  • Free delivery

  • Money back guarantee

Ask an Expert

Our tech experts are ready to help!

(62) 021-53167044 | 0812-83861970 | 0812-9915277

Email Us

Share

The BESANTEK BSTET19 Ground Resistance Clamp Tester, 30A, 32mm Diameter Clamp is designed to measure integrated value of ground resistance and resistance lead. This model provides non-contact resistance measurements, and includes data storage for 99 sets of results as well as RS-232 data transfer for data uploading. The BST-ET19 offers a circular clamp opening.

There are no reviews for this product.

Write a review

  • Non-contact ground resistance test
  • Clamp Diameter: 32mm
  • Resistance Range: 0.01~1200 Ohm
  • Resistance Resolution: 0.001Ohm
  • AC current leakage resolution: 0.00mA ~ 30.0A
  • Loop resistance measurement, no need to disconnect the ground wire from rods
  • RS232 interface for data uploading
  • Audible and visual alarms
  • Alarm Threshold Setting Range: Resistance: 1Ohm~199Ohm, Current: 1mA~499mA
  • Interference signal recognition

  • Resistance Resolution: 0.001Ω
  • Resistance Highest Accuracy: ±1% ±0.01Ω
  • AC Current Leakage Range: 0.00mA~30.0A
  • AC Current Leakage Resolution: 0.05mA
  • Current Highest Accuracy: ±2.5% ±1mA
  • Resistance Measurement Frequency: >1kHz
  • Resistance Range: 0.01~1200 Ω
  • Measured Current Frequency: 50Hz/60Hz
  • Alarm Threshold Setting: Range Resistance: 1Ω~199Ω; Current: 1mA~499mA
  • Internal Consumption: <50mA
  • Auto Power-of: 5 minutes after boot up
  • Data Memory: 99 sets
  • Operating Temperature & Humidity: -10°C~55°C, 10%RH~90%RH
  • Storage Temperature & Humidity: -20°C~ 60°C, below 70%RH
  • LCD Screen: 4 Digits LCD display, screen size: 47mm x 28.5mm
  • Clamp Size: Dia. 32mm
  • Power Source: 1.5V AA alkaline battery x 4
  • Dimensions: 260 x 90 x 66 mm (10 x 4 x 3 ")
  • Weight: 1120g (battery included)

  • (4) 1.5V AA Batteries
  • (1) Test Ring
  • (1) Carrying Case
  • (1) CD with Software
  • (1) RS-232 Data Cable
  • (1) User Manual

Download

Note: Prices are not binding at any time subject to change without prior notice