Fluke Calibration E-DWT-H [6531-14M] Electronic Deadweight Tester 1.4 to 14 MPa (200 to 2,000 psi)

The Fluke Calibration 653114M Electronic Deadweight Tester Kit, 1.4 to 14 MPa (200 to 2000 psi) is at home in metrology and calibration labs, on the production floor, or in the field. It can operate with a wide selection of test mediums, including Sebacate calibration fluid, mineral oil, water and other liquids. ± 0.02 % of reading total one-year measurement uncertainty rivals the best laboratory deadweight testers. High quality hardware allows for easy system fill and prime, pressure generation, and precise control. Premium performance is wrapped up into one, compact, lightweight, transportable package. An optional battery/charger pack supports up to eight hours of operation away from line power, and an optional shipping/carrying case with handles and wheels allows for easy transport during field application.

High Performance Calibration Made Simple.
Fluke Calibration 6531-14M features E-DWT-H configurations, combined with the accessories needed for a complete calibration system. The 6531-14M options feature E-DWT-H configurations with a single quartz reference pressure transducer (Q-RPT) to offer percent of reading performance from 10% to 100% of device full scale. An included vacuum fill kit allows the E-DWT to be filled with your choice of compatible fluid, while eliminating problematic air pockets from the test circuit. Also included is a test station adapter to mount just about any pressure device to be tested without using PTFE tape or wrenches. This kit provides all that you need to perform high level hydraulic pressure calibration, right out of the box.