• Part Number: IS31-1500PSI
• Sensors: Single sensor
• Pressure Unit: PSI
• Pressure Range: 0 to 1500 psi
• Pressure Manifold: Standard
• Pump System: None
• Liquid: None
• Carrying Case: None
• Accuracy of 0.05% of reading
• Compensated for use with media between 0 and 50°C
• Measures 0 to 55 mA with 0.001 mA resolution and 0.025% accuracy
• Accepts gases and fluids compatible with stainless steel and Viton®
• 1/8 FNPT pressure connection
• Optional 316 stainless steel manifold
• Micro-USB port for configuration and data acquisition
• Rugged, extruded aluminium casing
• Lightweight, compact design

• ACCURACY–PRESSURE MEASUREMENT:
• 0 to 110% of Range: ±(0.05% of Reading + Floor Term)
• Floor Term: 0.005% of FS or display resolution,
• whichever is greater
• Vacuum: ±(0.25% of Reading + Vacuum Floor Term)
• Vacuum Floor Term:
• 0.004 psi for 16 and 36 psi
• 0.01 psi for 300 psi
• ACCURACY– MILLIAMPERES:
• Accuracy: ±(0.025% of Reading + 0.001 mA)
• Range: 0 to 55 mA
• Resolution: 0.001 mA
• Connection: 4mm jacks, 19mm (0.75") spacing
• OPERATING TEMPERATURE:
• Temperature Range: 0 to 50° C (32 to 122° F)
• DISPLAY:
• Screen: 2 lines of up to 6 digits, 5mm (0.2") high
• Display Rate: 2 readings/second (Adjustable to 1, 3, or 3.7 readings/second)
• POWER: 
• 1 x 9V: 90 hours, typical
• DATA/COMMUNICATION
• Digital Interface: micro-USB
• ENCLOSURE:
• Model 31≤300 psi: 342g (12.0oz)
• *Model 31≤300 psi: 428g (15.0oz)
• Model 31≥1500 psi: 360g (13.0oz)
• Model 33: 400g (14.0oz)
• *Model 33: 485g (17.0oz)
• Housing: Extruded aluminum
• Keypad and Labels: UV resistant polyester
• *SPSS optional manifold.
• SENSOR ≥ 1500 psi:
• Wetted Materials: 316 stainless steel
• Diaphragm Seal Fluid: Silicone Oil
• Connection: Bottom, 1⁄8" female NPT
• SENSOR ≤ 300 psi:
• Wetted Materials: 316 stainless steel, Viton® (o-ring)
• Anodized aluminum penetrated with PTFE (polytetrafluoroethylene)
• Diaphragm Seal Fluid: Silicone Oil
• Connection: Bottom, 1⁄8" female NPT
• STORAGE TEMPERATURE:
• Temperature Range: -20 to 70° C (-4 to 158° F)
• SPECIAL FEATURES:
• The following requires the use of ConfigM30 software
• User Defined Unit: Allows the user to define and display any pressure units not included, or to use the gauge to display force, level, or other pressure related parameters. Reduce or increase displayed resolution.
• Remove: Unwanted pressure units from Units button.
• Password Protect: Changes to configuration or userspan calibration factor(s).
• Save: Configuration to a file.
• Copy: Configuration to other calibrators.

• (1) 31 Single Calibrator
• (1) CD Manual
• (1) ISO 17025 Accredited Calibration Certificate, NIST Traceable
• (1) Carry Case and Strap (P/N 2490)

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice