Ametek Crystal T-975-CPF and T-620H-CPF [HOX] Pump System H, 27 inHg to 580 psi/-0.91 to 40 bar & 0 to 5000 psi/350 bar (Oil)

Ametek Crystal T-975-CPF and T-620H-CPF [HOX-W] Pump System H, 27 inHg to 580 psi/-0.91 to 40 bar & 0 to 5000 psi/350 bar (Oil) & Waterproof Case.
Ametek T-975 [T-975-CPF] Pneumatic Pressure Pump With CPF Hose and Fittings, -0.91 to 40 Bar (-13.1 to 580 Psi). The Ametek T-965 / T-975 Pneumatic Pressure Pumps feature both vacuum and pressure generation. A button (valve) makes it easy to switch from vacuum to pressure measurements. Built-in release valve, vernier valve for fine adjustment and dual pressure output enable safe and simple operation. The unit offers both metric and imperial threads on the reference connection and the hose. The T-965 has a range of -0.65 to 2 bar/-9.4 to 30 psi and the T-975 has a range of -0.91 to 40 bar / -13.1 to 580 psi. Ready-to-use pressure systems for the DPC-500, APC, CPC, and IPI calibrators. For all pressure systems the pump and the indicator are separate systems. Therefore a replacement of the pump does not mean that you have to send the complete system for repair. Maintenance of the instrument is also made easy. Recalibration of the unit can be performed locally with an accurate pressure reference: No need to send the unit back to the manufacturer for recalibration. If you do require a factory calibration, the pump and indicator are independent and only the indicator needs to be returned. JOFRA pressure calibrators are as standard delivered as individual indicators or as a complete calibration systems ready to use in a carrying case, including pump, hose, set of fittings, batteries, test leads, user manual, and a NIST traceable calibration certificate.
Ametek T-620 [T-620-CPF] Hydraulic Pressure Pump with CPF Hose and Fittings, 0 to 200 bar / 0 to 3000 psi. The Ametek T620 Hydraulic Hand Pump, 0-3000 psi is small, lightweight and portable, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve provides quick and positive shut-off and pressure release. This model features a transparent reservoir to easily view the test fluid. The pump is compatible with petroleum-based oils or hydraulic fluids. The reference gauge is mounted on the body manifold with a swivel fitting for easy viewing. A vernier adjustment allows for precisely control pressure. A vent valve is provided for quick and positive shut-off and pressure release. The pump is equipped with a 24 in (60.95 cm) rubber hose with 1/4 in NPT connector and 1/4 in BSP adapter for connecting to the instrument-under-test.