• Part Number: 627150-20
• Cable Length: 20m
• Parameter: Optical DO, Conductivity & Temperature
• ProDSS ODO/CT-20 meter cable assembly with non-replaceable conductivity, temperature, and optical DO sensors
• Integral (i.e. built-in) optical DO, conductivity, and temperature sensors that are auto-recognized by the ProDSS handheld, reducing instrument set-up time
• Automatically compensates DO mg/L measurements for salinity; no need to enter salinity compensation values
• Rugged Optical DO sensor cap with a 2-year warranty is pre-installed on new assemblies
• Fits in a 1 inch well
• Cable lengths up to 100 meters

• Accuracy:
• Temperature  ±0.2 °C
• Dissolved Oxygen: 0 to 200%: ±1% of reading or 1% saturation, whichever is greater 200 to 500%: ±8% of reading 0 to 20 mg/L: ±0.1 mg/L or 1% of reading, whichever is greater 20 to 50 mg/L:                ±8% of reading
• Conductivity: 0 - 100 mS/cm: ±0.5% of reading or .001 mS/cm, whichever is greater 100 - 200 mS/cm: ±1.0% of reading
• Specific Conductance: 0 - 100 mS/cm: ±0.5% of reading or .001 mS/cm, whichever is greater 100 - 200 mS/cm: ±1.0% of reading User selectable reference temperature (15 to 25 °C; default 25 °C)               and compensation coefficient (0 to 4%/°C; default 1.91%)
• Salinity: ±1.0% of reading or ±0.1 ppt, whichever is greater
• Total Dissolved Solids (TDS): Calculated from specific conductance and a user-selectable TDS multiplier (0.30 to 1.00; default 0.65)
• Seawater Density: - Sigma is calculated from salinity, temperature, and pressure (depth) Sigma T is calculated from salinity and temperature
• Resistivity: ±0.1% Full Scale
• Equipment used with: ProDSS, ProSolo
• Measurement Range: 
  
• Temperature: -5 to 70 °C (temperature compensation range for DO mg/L measurement: -5 to 50 °C )
• Dissolved Oxygen: 0 to 500%, 0 to 50 mg/L
• Conductivity: 0 to 200 mS/cm
• Specific Conductance: 0 to 200 mS/cm
• Salinity: 0 to 70 ppt
• Total Dissolved Solids (TDS): 0 to 100 g/L
• Seawater Density: 0.0 to 50.0 sigma, sigma T
• Resistivity: 0 to 2 Mohms
• Resolution:
  
• Temperature: 0.1 °C or 0.1 °F (user selectable)
• Dissolved Oxygen: 0.01 mg/L and 0.1%, or 0.1 mg/L and 1% (user selectable)
• Conductivity: 0.001, 0.01 or 0.1 mS/cm
• Specific Conductance: 0.001, 0.01, 0.1 mS/cm
• Salinity: 0.01 ppt
• Total Dissolved Solids (TDS): 0.001, 0.01, 0.1 g/L
• Seawater Density: 0.1 sigma or sigma T
• Resistivity: 0.001, 0.01, 0.1
• Size: 0.97 in. width x 10.29 in. length (2.46 cm x 26.14 cm)
• Unit of Measure: Temperature - °C, °F, K; DO - % saturation, % saturation local, mg/L, ppm; Conductivity - µS/cm, mS/cm; Specific Conductance - µS/cm or mS/cm; Salinity - ppt or PSU; Total Dissolved          Solids (TDS) - mg/L, g/L, kg/L; Seawater Density - Sigma, Sigma T; Resistivity - ohm-cm, kohm-cm, Mohm-cm
• Warranty: 2-year probe and cable assembly; 2-year extended warranty ODO sensor caps; 1-year ODO sensor caps

• (1) 627150-20 Cable Assembly with Optical DO, Conductivity & Temperature Sensors, 20m

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice