The Solinst Model 102M P10 Probe Mini Water Level Meter is designed to measure groundwater levels in small diameter tubes and piezometers. A choice of two small diameter probe designs are attached to a narrow coaxial cable. The cable has a heavy-duty polyethylene jacket and stainless steel coaxial conductors for durability and strength. Permanent markings are precisely laser etched on the cable every 1/100 ft. or each millimeter.

A standard 9 volt battery, housed in an easy-access battery drawer, powers the Water Level Meter. When the probe enters water, a light and clearly audible buzzer are activated. The water level is then determined by taking a reading directly from the cable at the top of the well casing or borehole. A sensitivity control allows the buzzer to be turned off while in cascading water and ensures a clear signal in both high and low conductivity conditions.

Features:

---

• Accurate, precise laser markings
• 10mm x 70mm probe with 10 stainless steel weights
• Heavier probe assembly ideal for greater depths

What's In The Box:

---

• (1) Water level meter and tape guide
  
• (1) Cable marked every millimeter
  
• (1) Stainless steel probe measures 0.375″ in diameter x 2.75″ long and weighs 6.14 oz

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice