×
Multiple Product

have been added to your cart

There Are items in your cart.

Cart Subtotal: $xxx.xx

Go to checkout

AEMC CA7028 [2127.82] Wire Mapper Pro LAN Cable Tester

Not yet rated Write a review
AEMC
Rp.18,667,680
Availability:
2 - 4 WEEKS
Product Code:
2127.82
Brand:
AEMC
Update Terakhir:
19 Mar 2024

  • Free delivery

  • Money back guarantee

Share

AEMC CA7028 [2127.82] Wire Mapper Pro LAN Cable Tester. The Wire Mapper Pro Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTPand SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B (ISO11801 and EN 50137), USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults. In the event of opens and shorts, the Model CA7028 uses TDR technology to indicate if the fault is at the near end or the remote end of the cable, or if it is somewhere in between. It will then indicate the distance to the fault. The Model CA7028 has the ability to measure and indicate the length of the cable under test, using a Vp (Velocity of Propagation) set by the user, from a built-in library or manually. It will measure and report the length of all four pairs of wires in the cable under test. It also generates an audible tone that is transmitted into all four pairs on the cable under test. This can be used for cable tracing and identification in conjunction with a tone receiver. The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service.


  • Part Number: 2127.82
  • Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires
  • Unique graphical and digital display of fault information and length
  • Indicates distances to opens and shorts and identifies locations
  • Built-in tone generator for tracing and locating cables
  • Built-in service check function to detect telephone, 10BaseT, 100Mbit+ and token ring
  • Visual and audible warning of live telephone network voltages
  • Works with all Category 6 cables
  • Large high-visibility blue electroluminescent backlit display
  • Active remote identifiers indicate Pass/Fail at remote end
  • Up to 16 unique remote identifiers available
  • Works with TIA 568A/B, USOC and ISDN wiring schemes
  • CE Mark

                      • Range: 500ft (150m)
                      • Accuracy: ±5% of Reading
                      • Cable Type: UTP, STP, FTP, SSTP
                      • Faults Indicated:
                      • Short Circuit Pair
                      • Open Circuit Wire
                      • Short Between Pairs
                      • Split/Cross Pairs
                      • Pair Reversals
                      • Shield Continuity
                      • Fault Location: Near end, remote end, or distance if midway
                      • Fault Display: Fault and setting info displayed textually and graphically
                      • Output Impedance: Automatic compensation
                      • Main Unit Display Resolution: 128x64 pixel graphical LCD
                      • Backlight: Blue electroluminescent
                      • Tone Generator: Oscillating 810 to 1110Hz
                      • Voltage Warning: Audible and visual warning of TNV (Telecom Network Voltage)
                      • Power Source: 4 x 1.5V AA alkaline batteries (included)
                      • Auto Power Off: After three minutes
                      • Dimensions Main Unit:
                      • Remote (included):
                      • 6.5 x 3.5 x 1.5” (165 x 90 x 37mm)
                      • 2.5 x 2.0 x 1.0” (65 x 52 x 25mm)
                      • Weight : Main Unit
                      • Remote (included):
                      • 12 oz (350g)
                      • 1.5 oz (40g)
                      • Operation Temperature: 32° to 112°F (0° to 44°C)
                      • Storage Temperature : -4° to 158°F (-20° to 70°C)
                      • Ingress Protection (IP) Rating: IP54
                      • EMC: EN 61326-1, EN 61000 Parts:  4-2, 4-3, 4-4, 4-6
                      • Safety Compliance: IEC 61010-1

                      • (4) AA batteries
                      • (1) BNC pigtail cable with Alligator Clips
                      • (1) Soft Carrying Case
                      • (1) Instruction Manual

                          Download

                          Note: Prices are not binding at any time subject to change without prior notice

                            Options 0 Item Selected
                          Image
                          Model
                          Product Name
                          Price
                          Available
                          Quantity
                          AEMC CA7028 [2127.82] Wire Mapper Pro LAN Cable Tester
                          2127.82
                          Rp.18,667,680
                          2 - 4 WEEKS

                          • National Delivery

                            FREE SHIPPING for all provinces of Indonesia

                          • Safe Payment

                            Using the most secure payment methods

                          • Customer Protection

                            From click to delivery.

                          • 24/7 Help Center

                            Proffessional assistance for a smooth shopping experience.

                          PT. Indomultimeter Test Instruments

                          Mall WTC Matahari Serpong UG Fl. U10 Tangsel Banten Indonesia

                          (+62.21) 53167044
                          sales@indomultimeter.com