Digital Multimeter Model 5217

The Model 5217 is a portable hand-held multimeter that measures a variety of electrical and physical quantities including voltage (AC and DC), resistance, capacitance, frequency and temperature. These instruments can also perform continuity checks, voltage detection and diode testing (including forward bias voltage). Measurement features include Auto Range mode, which enables the instrument to select the best range for the input detected, and a Data HOLD function. These instruments are rugged and simple to use and rated to 600V CAT III.

AEMC 400D-10 Clamp Meters

An ideal addition to the electrician’s tool kit, the Digital FlexProbe® series can be used for TRMS AC current measurements and are rated at 600V CAT IV. They provide a welcome solution when accessing electrical conductors in difficult and tight places.

The Model 400D, available with either a 6", 10" or 24" sensor, has a measurement range starting at 20mA, and is designed for work in residential, commercial and light industrial applications. It can be used to check electrical distribution systems up to 400 Amps.

The Model 4000D, available with either a 14" or 24" sensor, has a measurement range starting at 200mA and can be used on higher-power industrial installations, as well as electrical utilities for measurements up to 4000 Amps.

Non-Contact AC Voltage Detector Model NC-1

The Model NC-1 is a Non-Contact AC Voltage Detector designed for indoor use. It has a sensitivity range of 120 to 240VAC, detection distance of <5mm, and overvoltage of 600V. This detector carries a safety rating of 600V CAT III.

AC Line Splitter Model ALS-1

The AC Line Splitter Model ALS-1 increases the sensitivity of clamp-on current probes and clamp-on meters. The Model ALS-1 provides temporary separation of conductors (avoiding splitting of the line) to facilitate measurement of current. Simply plug the Model ALS-1 into a connector for a safe measurement. Two clamp positions are available: X1 for direct readings, and X10 for actual reading multiplied by 10. Also features voltage checking.

Megohmmeter Model 6527

The Model 6527 is a portable multi-range True Megohmmeter® capable of measuring insulation resistance from 1kΩ to 4000MΩ. It has three user selectable test voltages of 250V, 500V and 1000V. The Model 6527 is also a multimeter that features an AC/DC voltmeter function capable of measuring up to 600VAC and 1000VDC, continuity test function with audible beeper for resistances under 35Ω, and an overload protection of 600Vrms. In addition, it can measure resistance up to 400kΩ. The TEST button has an associated locking feature for continuous tests up to 15 minutes, eliminating the need to manually hold down the button. This lightweight, easy-to-use megohmmeter can be used for most commonly performed insulation tests, such as on cables, switch gears, motors, DC generators, power tools and small appliances.n peralatan kecil.