• 220V Version
• Dual or single trace operation
• 5 mV/div sensitivity
• Calibrated 23-step time base with X10 magnifier
• AUTO/NORM triggered sweep operation with AC, TVH, TVV and line coupling
• Video sync trigger
• Alternate/chop sweep
• Delayed time base
• Main, Mix, Delay, X-Y sweep modes
• Sum and difference capability

• VERTICAL AMPLIFIERS (CH 1 and CH 2)
• Sensitivity: 5 mV/div to 5 V/div, 1 mV/div to 1 V/div at X5
• Attenuator: 10 steps in 1-2-5 sequence. Vernier control provides full adjustment between steps
• Accuracy: ±3%, ±5% at X5
• Input Impedance: 1 MΩ ±2%
• Input Capacitance: 25 pF ±10 pF
• Frequency Response: 5 mV to 5 V/div: DC to 30 MHz (-3dB). X5: DC to 10 MHz (-3dB)
• Rise Time:  12 ns (Overshoot ≤5%)
• Operating Modes: CH 1: CH 1, single trace
• CH 2: CH 2, single trace
• ALT: dual trace, alternating
• CHOP: dual trace, chopped
• ADD: algebraic sum of CH 1 + CH 2
• Polarity Reversal: CH 2 only
• Max. Input Voltage: 400 V (DC + AC peak)
• SWEEP SYSTEM
• Sweep Speed: 0.1 µs/div to 2 s/div in 1-2-5 sequence, 23 steps, Vernier control provides fully adjustable sweep time between steps.
• Accuracy: ±3%
• Sweep Magnification: 10x ±10%
• TRIGGERING
• Triggering Modes: AUTO (free run) or NORM, TV-V, TV-H
• Trigger Source: CH 1, CH 2, ALT, EXT, LINE
• Max External Trigger Voltage: 300 V (DC + AC peak)
• Trigger Coupling: AC 30 Hz to 30 MHz
• TV H: Used for triggering from horizontal sync pulses
• TV V: Used for triggering from vertical sync pulses
• TRIGGER SENSITIVITY
• Auto: Bandwidth:100 Hz-30 MHz, Internal: 1.5 div, External: ≥0.5Vp-p
• Norm: Bandwidth: DC to 30 MHz, Internal: 1.5 div, External: ≥0.5Vp-p
• TV V: Bandwidth: 20 Hz-1 kHz, Internal: 1.0 div, External: ≥0.5Vp-p
• TV H: Bandwidth:1 kHz-100 kHz, Internal: 1.0 div, External: ≥0.5Vp-p
• HORIZONTAL AMPLIFIER (Input through channel 1 input)
• X-Y Mode: Switch selectable using X-Y switch. CH 1: X axis, CH 2: Y axis
• Sensitivity: Same as vertical channel 2
• Input Impedance: Same as vertical channel 2
• Frequency Response: DC to 1 MHz typical (-3 dB)
• X-Y Phase Difference: Approximately 3˚ at 50 kHz
• Maximum Input Voltage; Same as vertical channel 2
• CRT
• Type: Rectangular with internal graticule
• Display Area: 8 x 10 div (1 div = 1 cm)
• Accelerating Voltage: 2 kV
• Phosphor: P31
• Trace Rotation: Electrical, front panel adjustable
• Calibrating Voltage: 1 kHz (±10%) positive square wave, 2 V p-p (±3%)
• COUNTER (2121C)
• Display: 5 digits, 0.36” red LED, display at “Hz” or “kHz” auto range
• Display Resolution: Auto select from 0.001 Hz to 1 kHz depending on the frequency
• Max. Counter Range: 0.1 Hz to 50 MHz
• Accuracy: +0.01% + 1 digit or 1/99999 + 1 digit
• Time Base: 18,432 MHz + 10ppm (23 ºC ±5 ºC)
• GENERAL:
• Temperature; Within specified accuracy: 50˚ to 95˚F (10˚ to 35˚C), 10-80% RH Full operation: 32˚ to 122˚ F (0˚ to 50˚C), 10-80% RH; Storage: -22˚ to 158˚ F (-30˚ to +70˚C), 10-90% RH
• AC Input: 100/120/220/240 VAC ±10%, 50/60 Hz, approximately 40 W.
• Dimensions (WxHxD):  7 x 14.5 x 17.25" (180 x 370 x 440 mm)
• Weight: 16.8 lbs (7.6 kg)
• Supplied Accessories: Instruction manual, two PR-33A X1/X10 probes or equivalent, AC power cord and spare fuse
• Optional Accessories: PR-32A demodulator probe, PR-37A x1/x10/REF. probe, PR-100A x100 probe, PR-55 high voltage x1000 probe, LC-210A carrying case

• (2) PR-33A x1/x10 Probes or Equivalent
• (1) AC Power Cord
• (1) Spare Fuse
• (1) User's Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice