• Part Number: TW9000-SC
• Kit: Soft Carrying case & 5 in. Inductive Coupling Clamp
• Employs digital signal processing technology for locating/tracing buried utilities quickly/accurately
• Transmitter energizes buried utilities using operator-selectable connection methods
• Receiver detects active/passive magnetic fields emitted from energized buried utilities
• Conductive connection kit includes cables/ground rod for conductive tracing
• 3 connection methods for transmitter, 6 operating modes for receiver
• Controls for selecting tracing frequencies, adjusting intermediate/maximum output levels applied to utility, adjusting audio alert volume level on transmitter
• Controls for selecting frequency, adjusting gain/volume, measuring depth/energizing current of buried utilities on receiver
• Backlit LCD communicates operating parameters, connecting status, warnings
• Visual indicators of directional-left, right, azimuth, over-target, signal strength
• Audio feedback with variable pitch alerts receiver of utility location
• Powered by rechargeable 14.4V li-ion battery
• Auto power-off function conserves battery life after specified period of key-press inactivity
• Soft carrying case protects instruments during storage/transport
• Inductive coupling clamp can be used to transfer power inductively from transmitter to utility without direct connection

• TRANSMITTER:
• Output:
• Maximum Output Current: 0.45A
• Maximum Output Voltage:  90VRMS Max. User max voltage selection: 30V, 60V or 90V.
• Output Frequencies: 512Hz, 8.125kHz, 33.025kHz, 82.175kHz. User selectable.
• Maximum Output  Power: 9.5W for 512Hz, 8.125kHz & 33.025kHz. 0.95W for 82.175kHz. User max power selection: 1W,2W,3W,4W,5W,6W,7W,8W, 9W,9.5W. For 82.175kHz max power is set to 0.95W.
• Auto Power Down : To conserve battery life an auto power down timer will turn the Transmitter off after a period of time. The timer may be set from 5 minutes to 9 hours 15 minutes. The timer function may be turned off and on by the user.
• Stray Voltage Output Protection: Transmitter senses stray 50/60Hz voltages above 30V on the output. If the Transmitter is operating and 50/60Hz voltages above 25V are sensed, the Transmitter output will turn off automatically.
• Operating Modes:
• Direct Connection: The direct connection accessory red lead is connected to the utility and the black lead is connected to a ground rod inserted into the ground.
• Coupling Clamp Connection: The Coupling Clamp accessory is clamped around the pipe or cable. The clamp magnetically induces a signal into the utility without electrical connection to the utility.
• Inductive Connection: The Transmitter’s internal antenna radiates a magnetic field that energizes the utility.
• Mechanical:
• Weight: 5.6 lbs.
• Connectors, External: Accessory Jack Connector, 4 Pole, Chassis, Male, 25A, 250VAC Neutrik NL4MPXX
• Power Supply: Battery Pack, Rechargeable Li-Ion Battery Pack, 4S2P, 14.4V ,99Wh, 6.9Ah
• Operating Time: Li-Ion 8 hours @ 7.0 Watts
• RECEIVER:
• Operating Modes:
• Peak & Null Mode: Receiver gain adjusts automatically for peak VCO audio pitch when directly over a utility.
• Wide Peak Mode: Useful for detecting utilities from far lateral distances or utilities that are deeply buried.
• Narrow Peak Mode: Useful when tracing in areas congested with multiple utilities.
• Null Mode: Useful for determining the location of buried utilities having low field shape distortion.
• Passive Power Mode: Trace buried utilities that are passively energized by AC power currents.
• Sonde Mode: Detect sondes and measure sonde depth.
• Mechanical:
• Weight: 3.8 lbs.
• Power Supply: Battery, Rechargeable Protected Rechargeable 26650 Li-Ion; 3.6V/ 5500mAh
• Flexible Battery System: 2 x D-Cell Alkaline
• Operating Time: 1 x Li-Ion, 26650 more than 17 hours; 2 X D Cell (flexible) more than 8 hours
• Environmental:
• Ingress Protection: IP64
• Operating Temperature: -20°C to 45°C (-4°F to 113°F)
• Storage Temperature: -20°C to 70°C (-4°F to 158°F)
• Humidity: 0-95%, noncondensing
• Altitude: 5,000 meters (3.1 miles)
• For Outdoor Use: Not in wet locations

• (1) Transmitter
• (1) Receiver
• (1) Conductive Connection Kit
• (1) Transmitter Rechargeable Battery Kit
• (1) Receiver Rechargeable Battery Kit
• (1) Inductive Coupling Clamp, 5 in. (CCLAMP-5-MF)
• (1) Soft Carrying Case
• (1) User Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice