Fluke 1587KIT/62MAX+ FC [FLUKE-1587KIT/62MAX+ FC] True-RMS Megohmmeter with Fluke Connect, AC Current Clamp and Infrared Thermometer Combo Kit

1587 FC

• True-RMS Megohmmeter/Insulation Resistance Tester and Multimeter with Fluke Connect
  
• True-RMS measurements
  
• Built-in Fluke Connect button
  
• Large, backlit display
  
• PI/DAR timed ratio tests
  
• Live circuit detection prevents insulation test when voltages is above 30V
  
• VFD low-pass filter for accurate motor drive measurements
  
• Auto-discharge of capacitive voltage
  
• Insulation test range 0.01 MΩ - 2 GΩ
  
• Multiple insulation test voltages: 50V, 100V, 250V, 500V, 1000V
  
• AC/DC voltage, DC millivolts, AC/DC milliamps, resistance, continuity, capacitance, diode test, temperature, Min/Max, frequency
  
• Auto power off saves battery life
  
• CAT III 1000 V, CAT IV 600 V measurement category
  

62 MAX +

• Infrared Thermometer, -22-1202°F Range, 12:1 Ratio
  
• Measure -30° to 650°C/-22° to 1202°F
  
• Up to +1.0°C or +1.0% of reaching
  
• IP54 rating for water resistance and dust allows you to work in rain or shine and dirty or dusty industrial sites
  
• Strong enough to withstand 3 m drop
  
• Small and lightweight; clips to tool belt or belt loop, or easily fits into most tool boxes
  
• 12:1 distance-to-spot ratio
  
• Precise laser technology makes for more accurate and repeatable measurements
  
• Dual lasers help you identify areas to be measured
  
• Large, backlit display makes data easier to read, even in dark areas
  
• Displays minimum, maximum or average temperatures, or difference between two measurements
  
• Alarm: Hi and Lo alarms for rapid display of measurements outside of limits
  
• Powered by single, standard AA battery
  

i400

• AC Current Clamp/Banana Plugs
  
• Current range: 1A to 400A AC
  
• Frequency range: 5 kHz to 20 kHz (-3 dB)
  
• Division ratio: 1000:1
  
• Safety rating: CAT IV 600 V, CAT III 1000V
  
• 1 mA/Amp output guarantees easy reading on you meter
  
• Take accurate current readings without breaking circuits
  
• Soft non-slippery overmold handle prevents you from accidentally touching live wiring

Specifications

• (1) True-RMS Megohmmeter/Insulation Resistance Tester and Multimeter with Fluke Connect (1587 FC)
  
• (1) AC Current Clamp/Banana Plugs, 1A-400A AC (i400)
  
• (1) Infrared Thermometer, -22-1202°F Range, 12:1 Ratio (62 MAX+)
  
• (1) Remote Probe
  
• (1) Test Lead Set
  
• (1) Alligator Clip Set
  
• (1) K-Type Thermocouple
  
• (1) Hard Carrying Case
  
• (1) User Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding , subject to change without prior notice