• Besantek BSTMG01H2S [BST-MG01H2S] Single Gas Detector, Hydrogen Sulfide (H2S)

Besantek BSTMG01H2S [BST-MG01H2S] Single Gas Detector, Hydrogen Sulfide (H2S)

Not yet rated Write a review
BESANTEK
Rp.9.082.688
Availability:
2 - 4 WEEKS
Product Code:
BST-MG01H2S
Brand:
BESANTEK
Update Terakhir:
13 May 2017
This product has a minimum quantity of 2
  • Free delivery

  • Money back guarantee

Share

The BESANTEK BSTMG01H2S Hydrogen Sulfide Gas Detector can be applied to underground coal mine, petrochemical industry, municipal, environmental protection and other spaces where explosive and toxic gases may exist. The BST-MG01H2S is specifically designed to detect Hydrogen Sulfide gas, and produces a sound and light alarm when the H2S gas concentration in the environment is higher or lower than that of preset alarm point. This device is portable and can be also used as a fixed device.

  • Measuring Range: 0~100 ppm
  • Resolution Ratio: 1ppm
  • Electrochemical sensor
  • Audible Alarm: Buzzer with ≥75dB
  • Visible Alarm: Flashing Red LED, ≥20m
  • High and low alarm point and fully adjustable
  • Rugged ABS+ PC case, heavy duty and crash resistant
  • Water resistant and dustproof (standard IP65)
  • Intrinsically safe device, it can be used in potential explosive environments
  • Microcomputer circuit with intelligent function
  • High capacity chip and 4 layers PCB board
  • USB interface
  • Low battery warning alarm
  • Stainless steel belt clip

  • Measuring Range: 0~100 ppm
  • Measurement Error: 0~49 ppm: 3ppm; 50~100 ppm: 10% of testing gas
  • Resolution Ratio: 1ppm
  • Sensor: Electrochemical sensor
  • Sensor Lifetime: 2 year
  • Response Time: 45s (T90)
  • Alarms: Audible: buzzer with 75dB audible; Visible: flashing red LED, 20m visible
  • Continuous Working Time: >300 hours
  • Working Current: <1mA (without backlight)
  • Display: Liquid crystal display (LCD)
  • Working Temperature: -25C ~55C; short time for -40C~55C
  • Protection Degree: IP65
  • Battery: 3.7V/1500mA
  • Charging Time: 4-5 hours
  • Dimensions: 105 × 54 × 32 mm
  • Weight: 200g

  • (1) Calibration Cap and Tube
  • (1) Adapter
  • (1) USB Cord
  • (1) Belt Clip
  • (1) Hanging Cord
  • (1) Leather Case
  • (1) User Manual

Download

Note: Prices are not binding at any time subject to change without prior notice