HD21ABE17 IAQ Monitors is a portable instrument for the analysis of indoor air quality (IAQ, Indoor Air Quality). The instrument simultaneously measures the following parameters: CO2 Carbon Dioxide, CO Carbon Monoxide, Atmospheric Pressure, Temperature and Relative Humidity, and it calculates Dew Point, Wet Bulb Temperature, Absolute Humidity, Mixing Ratio and Enthalpy. HD21ABE17 is a data logger with a memory capacity of 67600 recordings, divided in 64 blocks. It uses the DeltaLog10 software. Reference Standards: ASHRAE 62.1, Legislative Decree 81/2008. These regulations apply to all confined spaces that could be used by people. Kitchens, baths, changing rooms and swimming pools are included, due to their high humidity. You should take into account, in regard to air quality, possible chemical, physical and biological contaminants.
The instrument has a wide Dot Matrix graphic display with a resolution of 160 x 160 dots.
The instruments typical applications are:
Measurement of IAQ (Indoor Air Quality) and comfort conditions in schools, offices and indoor spaces.
Analysis and study of the Sick Building Syndrome, and of the resulting consequences.
Checking the HVAC (Heating, Ventilation and Air Conditioning) system efficiency.
Examination of IAQ conditions in factories to optimize microclimate and improve productivity.
LIGHT AND PORTABLE. Simple solution for the monitor and the analysis of indoor air quality in variuous situations Instrument and sensors factory calibrated
IMMEDIATE AND DIRECT READING. Backlit LCD graphic display for immediate reading of detected quantities
MULTIPLE PARAMETERS AT THE SAME TIME. Simoultaneous detection of CO2 / CO / Patm / T / RH; Calculation of Dew Point / Wet Bulb Temperature / Absolute Humidity / Mixing Ratio / Enthalpy
ACCORDING TO THE STANDARDS. According to ASHRAE 62.1applying to all confinated spaces used by people
SAVE YOUR MEASUREMENTS. Datalogging function with large memory capacity to store the data and transfer to a PC
Instrument:
Dimensions (Length x Width x Height): 210x90x40 mm (HD21ABE); 300x90x40 mm (HD21ABE17 with probe)
Weight: 470 g (batteries included)
Materials: ABS, rubber
Display: Backlit, Dot Matrix, 160x160 dots, visible area 52x42 mm
Operating conditions:
Operating temperature: -5 … 50°C
Warehouse temperature: -25 … 65°C
Working relative humidity: 0 … 85% RH without condensation
Instrument uncertainty: ± 1 digit @ 20°C
Power:
Mains adapter (code SWD10): 12Vdc/1A
Batteries: 4 x 1.2V Ni-MH rechargeable batteries AA type
Autonomy: 8 hours of continuous use in measure mode
Response time (T90): < 120 sec (wind speed = 2m/sec)
Long-term stability: 5% of measure/5 years
CO Carbon Monoxide:
Sensor: Electrochemical cell
Measurement range: 0 … 500ppm
Sensor working range: -5 … 50°C
Accuracy: ±3ppm+3% of measure
Resolution: 1ppm
Response time (T90): < 50 sec
Long-term stability: 5% of measure/year
Service life: > 5 years in normal environment conditions
Atmospheric Pressure Patm:
Type of sensor: Piezo-resistive
Measurement range: 750 … 1100 hPa
Accuracy: ±1.5 hPa @ 25°C
Resolution: 1 hPa
Long-term stability: 2hPa/year
Temperature drift: ±3hPa with temperature -20 … +60°C
Relative Humidity RH (HD21ABE17 only):
Type of sensor: Capacitive
Sensor protection: Stainless steel grid filter (on request 20µm sintered filter P6 in AISI 316 or 10µm sintered filter P7 in PTFE)
Measurement range: 0 … 100 % RH
Sensor working range: -20 … +60°C
Accuracy: ±2% (10÷90% RH) ±2.5% in the remaining range
Resolution: 0.1% RH
Temperature dependence: ±2% on all temperature range
Hysteresis and repeatability: 1% RH
Response time (T90): < 20 sec (wind speed = 2m/sec) without filter
Long-term stability: 1%/year
Temperature T (HD21ABE17 only):
Type of sensor: NTC 10kΩ
Measurement range: -20 … +60°C
Accuracy: ±0.2°C ±0.15% of measure
Resolution: 0.1°C
Response time (T90): < 30 sec (wind speed = 2m/sec)
Long-term stability: 0.1°C/year
(1) HD21ABE17: IAQ Monitor datalogger kit. It measures CO, CO2, atmospheric pressure, temperature and relative humidity.
(1) DeltaLog10 software downloadable from Delta OHM website (version 0.1.5.3 and later) for data download, monitor, and data processing on Personal Computer