GE Inspection Technologies Benchmark [113-224-591] MSW-QC Quick Connect Angle Beam Transducer 5.0 MHz 0.25 inches

GE Inspection Technologies angle beam transducers are single beam units that are designed for use with the GE Inspection Technologies USM Go flaw detector. These transducers use refraction to transmit shear or longitudinal wave at a predetermined angle and are preferred for parts with inclined flaws, such as welds. Wedges (sold separately) are used to hold the unit at the desired angle. A layer of couplant is required between the transducer and the material being tested.

GE Inspection Technologies angle beam transducers are ideal for general weld inspection as well as identifying flaws on pipes, tanks, pressure vessels, containers, axles, forgings, castings, pumps, valve housings, bridges and other structures, railroad wheels and rail, turbine blades, shafts, wheel rims, and others.

Features:

---

• Frequency: 2.25 or 5.0 MHz
• Diameter:
  • MSW-QC: 0.25 or 0.5 inches
  • AWS: 0.63 x 0.75, 0.63, x 0.63 or 0.75 x 0.75 inches
• Utilizes interchangeable wedges (sold separately)
• Maximum versatility and service life
• AWS models for AWS Structural Welding Code D1.1
  • Have BNC connector, top mount
• Microdot connector on MSW-QC models
• Waveform & frequency certification per ASTM E-1065

What's In The Box:

---

• (1) Benchmark [113-224-591] MSW-QC Quick Connect Angle Beam Transducer 5.0 MHz 0.25 inches

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice