• Part Number: DPI104-2-10PSIG
• Process Connection: 1/4 NPT Male, calibrated in psi
• Pressure Range: 0 to 10 psi / 1 bar (0.15% FS accuracy)
• Type: Gauge
• 0.05% full scale (FS) accuracy
• Pressure ranges to 20,000 psi (1400 bar)
• Eleven selectable pressure units
• Large, easy to read display with five digit resolution
• Pressure indication and bar graph for quick visual reference
• Temperature compensated accuracy from 14 to 122°F (-10 to 50°C)
• 0 to 5V analog output
• Pressure switch test
• Minimum/Maximum, tare and alarm functions
• IDOS compatible and RS232 serial interface
• Networking capability (1 to 99 units)
• Stainless steel or Inconel pressure cavity for aggressive media
• Includes NIST traceable certificate of calibration

• Display: LCD
• EMC EN: 61326-1
  
• Electrical Safety: EN 61010-1
• Pressure Safety: Pressure Equipment Directive - Class: Sound Engineering Practice (SEP).
• Power supply: 9V, IEC 6LR61, ANSI/NEDA 1604 battery, OR use an external 12-24 Vdc 50mA supply.
• Operating temperature: -10 to 50°C (14 to 122°F).
• Storage temperature: -20 to 70°C (-4 to 158°F).
• Ingress Protection: IP65 *.
• Operating Humidity: 0 to 95% relative humidity (RH) non-condensing
• Vibration: Def Stan 66-31, 8.4 cat III.
• Operating altitude: 2000 metres (6560 ft).
• Pollution degree; 2
• Switch input: Maximum impedance: 200Ω (mechanical contact only).
• Alarm output: Type: Open drain Field Effect Transistor (FET) Maximum (mA): 250 mA; Maximum (V): 24 Vdc.
• Analog output: 0.05 to 5 Vdc; Minimum load: 500 Ω;
• Accuracy: 0.1% FS at 20°C (68°F) - user mode only.
• Temperature coefficient: 0.007% FS / °C (0.0039% FS / °F).
• Battery life: Up to one year for pressure measurements: Au (power save facility) - On; maximum/minimum, alarm, Vout, switch - all set to OFF.
• RS232/Network capacity: For: IDOS UPM, external software, or up to 99 units in series (‘daisy chain’).
• Materials: Case: Acrylonitrile Butadiene Styrene (ABS) **
• Approved: CE Marked.
• Size: Diameter = 95 mm (3.74 in); Depth = 55 mm (2.2 in) Typical length (with connector) ≈ 120 mm (4.7 in).
• Weight: 350g (12.5 oz).

• (1) DPI104 Digital pressure gauge
• (1) Calibration Certificate
• (1) User's Manual
• (1) 9V Battery

Brochure/Datasheet

Instruction Manual

Druck SiCal Pro Software (59.3 MB)

Note: Prices are not binding at any time subject to change without prior notice