Fluke Networks IntelliTone Pro 200 [MT-8200-63A] Toner Probe

The Networks MT-8200-63A Intellitone 200 Probe. Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe detects IntelliTone digital signals, rejecting noise and false signals, to locate and trace data cabling on active networks. It detects 500 to 1,200 Hz analog signals to isolate individual wire pairs and trace voice, audio, and video cabling on inactive networks. The probe detects signals at cable racks, in patch panels, and even behind walls, and identifies detected signals audibly and with eight LEDs that light successively as the signal strength increases for prompt isolation of a single cable within a bundle. A sync LED shows battery strength at power-up and confirms reception of IntelliTone signals. The probe turns off automatically after one hour of inactivity. Tone probes are used by network technicians to troubleshoot and maintain wires and cable in telephone and data networks.

The Pro 200 probe has a cable map function that allows it to validate RJ11 and RJ45 connectors by testing continuity and finding short circuits, open circuits, and crossed-pair wiring faults on all four pairs of UTP and STP twisted pair cabling. RJ11 and RJ45 jacks plug into a port on the bottom of the probe.

---

Features:

---

• Supports digital signaling on CAT5e/6/6a data cabling and analog toning on voice-grade, coax, security/alarm, and speaker cabling
  
• Probes to identify individual pairs and miswires, and checks 10-/100-/1000-Mbps connectivity with NIC/hub indication
  
• Can be used with all types of copper cabling
  
• Identifies and diagnoses POTS with Line 1 and Line 2 service and polarity
  
• Eliminates confusion over cable location
  
• Locates cables on active networks
  
• Isolates a cable within a bundle, even with cable bleed
  
• Verifies installations with end-to-end continuity tests
  
• Detects opens, shorts, and reversed pairs
  
• Digital signal processing rejects noise and false signals
  
• Works safely on active networks
  
• Provides visual and audible signal strength identification.
  

---

What's In The Box:

---

• (1) 9 volt battery

---

Brochure/Datasheet

---

Instruction manual

Note: Prices are not binding , subject to change without prior notice