Dillon U-Force [30354-0082] Flat Bottom Low Profile Compression Force Measurement, 50kg Capacity (Compression Fitting Required - Sold Separately)

The Model U Force Gauge is an accurate (±1% of full range) mechanical compression-measurement instrument. Its slim-line design has repeatedly proven valuable in installations where space is at a premium. The versatility of this simple instrument is demonstrated by the fact that it can be used as a handheld device, permanently mounted on a fl at surface plate, or used in test fixtures.

How the U Force Gauge Works

The Dillon Model U Force Gauge employs a deflection beam machined from aircraft quality alloy steel and heat treated to develop optimum strength and spring characteristics. A precision dial indicator is mounted at the null point of this beam. Compression force is normally applied against a single pressure fitting mounted on the upper half of the beam. (For accurate calibration, designate the type of pressure fi tting you wish to use with the U Force Gauge. They are of four types: domed, cupped, fl at, or a fl at nylon insert. Flat bottom gauges require only one fi tting). When load is exerted, the beam moves downward causing a slanted anvil on the free end to push against the indicator plunger. The indicator reading is a direct representation of the applied load.

Dillon offers a capacity for every job
U Force Gauges are available for measurement in pounds or kilograms. There are 6-pound capacities ranging from 25 x .25 to 5,000 x 50 lb. The 4 kilogram capacities range from 10 x .1 to 500 x 5 kg. Dillon also offers high-capacity gauges with pounds capacities from 500 to 5,000 lb and a metric model with a capacity of 500 kg. Highcapacity gauges all have fl at-bottom design.

Option

• Zero position - The zero position on the indicator dial can be factory positioned at 12 o'clock, 3 o'clock, 6 o'clock, or 9 o'clock. The standard position is the 6 o'clock position.
• Maximum pointer — Model U Force Gauges can include a maximum pointer which remains at peak load until it is reset.
• Shockless dial indicator — Offers added protection in applications where force is applied or released rapidly.
• Dial orientation — The dial indicator can be factory positioned at 0° (standard), 90°, 180°, 270° clockwise. Photos on this page show standard dial orientation.
• Note: maximum pointer and shockless dial indicator cannot be offered on the same unit