The Digi-Sense WD-90000-23 Four Traceable International Standards Digital thermometers provides the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F.
Impervious stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet.
Unit conforms to ITS-90, International Temperature Standard Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvets, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater.
Records time and date for MIN/MAX readings and hi/lo alarm alerts Display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. WD9000023 displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration.
Features:
Temperature (°C): -45 to 65
Accuracy: +/-0.3°C; +/-0.05°C at 0.00°C
Battery: AA Battery (2)
Meter Measurement Type: Digital Indicator
Number Of Probe Channels: 1
Resolution is 0.01° Displays date and time of min/max temperature High and low settable alarms