• Part Number: AP471S1
• Probe for: HD2303.0, HD2103.1 and HD2103.2
• Measuring range: 0.02…40 m/s and -25 °C…+80 °C.
• Directional hotwire probe to measure air speed in the range 0.02…40 m/s and air temperature in the range -25 °C…+80 °C.
• Temperature compensation from 0 to +80 °C. Probe diameter (measurement area) 8 mm.
• Probe complete with handle and telescopic shaft: minimum length 360 mm, maximum length 1060 mm.
• Cable length with fully closed telescopic shaft 1800 mm.
• Probe complete with SICRAM module.

• Type of sensor:
• Speed: NTC thermistor
• Temperature: NTC thermistor
• Measuring range
  
• Speed: 0.1 - 40m/s
• Temperature: -25 to +80°C
• Measurement resolution:
  
• Speed: 0.01m/s;  0.1km/h; 1ft/min; 0.1mph; 0.1knot;
• Temperature: 0.1°C
• Measurement accuracy;
  
• Speed: ±0,2m/s (0 to 0.99m/s);  ±0.4m/s (1.00 bis 9.99m/s);  ±0.8m/s /10.00 bis 40.0m/s)
• Temperature: ±0.8°C (-10 to +80°C)
• Air temperature compensation: 0 to +80°C
  
• Sensor working conditions: Clean air, RH <80%
• Battery life: ca. 20h @ 20m/s with alkaline batteries
• Unit of measurement:
  
• Speed: m/s; km/h; ft/min; mph; knot
• Flow rate: l/s; m³/s; m³/min; m³/h; ft³/s; ft³/min
• Pipeline section for flow rate calculation: 0.0001 to 1.9999m²
  
• Cable length: ca. 2m
• Scope of delivery: Hot-wire telescopic probe

• (1) Hot-wire telescopic probe
• (1) 2m cable length

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice