Delta Ohm HD9817T RH and Temperature Digital Transmitters

Not yet rated Write a review
Delta Ohm

Available Options

Rp.11.410.720
Availability:
2 - 4 WEEKS
Product Code:
HD9817T
Brand:
Delta Ohm
Update Terakhir:
10 Aug 2023
  • Free delivery

  • Money back guarantee

Share

Dual relative humidity and temperature transmitter for HVAC applications, environmental monitoring, pharmaceutical storage, food transport, greenhouse automation, etc. Equipped with an IP65 stainless steel AISI 304 housing, it is suitable even for severe environments; besides, its ultra-compact dimensions (Ø 14 x 133 mm) and wide range of outputs (analogue 0…1V, digital RS232C OR RS485-MODBUS RTU, USB 1.1-2.0) make it ideal for integrating into a variety of OEM applications. It is supplied with the HD9817TC software for reading measurements and calibrating the relative humidity sensor.

Following types are available:
HD9817T1R: Dual temperature and relative humidity transmitter. 1/3 DIN Pt100 temperature sensor. Measuring range for relative humidity: 0…100%RH, for temperature: -40…+60°C. Double output signal 0…1Vdc. Power supply 5…35Vdc. Housing made of AISI 304, dimensions Ø 14mm, L= 138mm. Standard configuration 0…100%RH = 0…1Vdc, -40…+60°C = 0…1Vdc. 7-wire cable with shield L = 1.5m.

HD9817T2R: Dual temperature and relative humidity transmitter. Pt100 1/3 DIN temperature sensor. Measuring range for relative humidity: 0…100%RH, for temperature: -40…+60°C. RS232C output. Non-isolated power supply: power supply comes from RS232C PC output. Housing made of AISI 304, dimensions ∅ 14mm, L=138mm. Standard configuration 0…100%RH for relative humidity and -40…+60°C for temperature. Output cable with DB9 female connector, L=2m. Baud rate 2400.

HD9817TVS: Dual humidity and temperature transmitter, Pt100 sensor. 0…1 Vdc analog outputs and RS485 MODBUS-RTU output. Temperature measuring range -40…+60 °C. Power supply 5…30 Vdc. AISI 304 housing. IP 65 probe protection degree. Dimensions ∅14 x 155 mm. Output with 8-pole M12 male connector. Supplied with CP9817.3 cable, length 3 m.

  • Dual temperature and relative humidity transmitter
  • 1/3 DIN Pt100 temperature sensor
  • Measuring range for relative humidity: 0…100%RH
  • For temperature: -40…+60°C
  • RS232C output
  • Output cable with DB9 female connector


  • Output: 
  • HD9817T1R: 0…1 V = 0…100%RH0…1 V = –40…+60 °CH;
  • D9817T2R: RS232C non insulated, 2400 baud rate;
  • HD9817TVS: 0…1 V = 0…100% RH or 0…1 V = –40…+60 °C DP; 0…1 V = –40…+60 °C; RS485 Modbus RTU non insulated
  • Temperature sensor: Pt100
  • Load resistance: HD9817T1R : RL > 10kΩ; HD9817T2R: -; HD9817TVS: RL > 10kΩ
  • Cable Connection: HD9817T1R : L=1.5 m (7 wires + shield); HD9817T2R: L= 2m DB9 female connector; HD9817TVS: M12 8-pole connector. Provided with cable CP9817.3, L=3m
  • Sensor: Capacitive
  • Sensor protection: P8, stainless steel grid and PTFE, 10 µm
  • Measuring range: 0…100%RH
  • Sensor working range; -40…+80 °C
  • Relative humidity:
  • Accuracy: ±1.5% (0…90% RH), ±2% (90…100%) @ T= 15…35 °C; ±(1.5 + 1.5% measure)% @ T= remaining range
  • Response time at 63% of final variation: < 15 s @ 23 °C (air speed = 1 m/s without filter)
  • Temperature dependence: 2% on the whole temperature range
  • Hysteresis and repeatability: 0.4%RH Long term stability 1%/year
  • Temperature:
  • Sensor type: Pt100 1/3 DIN
  • Measuring range: -40…+60 °C
  • Accuracy : ±0.2°C ±0.15% of the measured value
  • Response time at: 63% of final variation < 15 s (without filter); Long term stability 0.2°C/year
  • General:
  • Power voltage: 5…35 Vdc; 5…30 Vdc (HD9817TVS)
  • Consumption: Typically 2 mA; 4 mA typical @ 12 Vdc (HD9817TVS)
  • Max. operating temperature: -40…+80 °C (for short periods)
  • Operating humidity: 0…100% RH
  • Housing: Dimensions; Ø14x138 mm; Ø14x155 mm (HD9817TVS)
  • Degree of protection: IP65



  • (1) HD9817T RH and Temperature Digital Transmitters
  • (1) Instruction Manual

Note: Prices are not binding at any time subject to change without prior notice