• Precise, drift-free dew/frost point measurement
• Primary method, chrome chilled mirror sensor
• Automatic Balance Control
• Easily serviceable sensor
• Audible and visual alarms
• Multiple interface options
• Integral sample flow meter
• Applications include:
• Compressed air
• Dryer systems
• Heat treating
• Fluidized beds
• Plastics blow and injection molding
• Pharmaceutical processes
• MAP systems
• Power and energy systems
• Verification of polymer and metal oxide sensor based hygrometers 

• Sensor Type:
• Primary method chilled mirror dew/frost point
• Dew/Frost Point Range (at 25°C ambient):
• S Series sensors: S2 two-Stage: -40 to 122°F (-40 to 50°C);
• S3 three stage: -103 to 122°F (-75 to 50°C).
• Liquid cooling is required to measure frost points below -60°C with S Series sensors.
• X3 Series sensors:
• X3 Standard: -50 to 165°F (-45 to 75°C);
• X3F Fan Cooled: -85 to 165°F (-65 to 75°C);
• X3SF High Efficiency: -95 to 165°F (-70 to 75°C);
• X3LC Liquid Cooled: -130 to 165°F (-90 to 75°C).
• Liquid cooling is required to measure frost points below -70°C with X3 Series sensors
• Accuracy, Dew/Frost Point:
• S Series: ± 0.5°F (± 0.28°C);
• X3 Series: ± 0.36°F (± 0.20°C).
• General:
• Display: Red LED, 0.5” (1.27mm) tall; 8 digit alphanumeric
• Operating temperature: 32° to 122°F (0° to 50°C)
• Sample connection: 1/4” compression fitting, standard model configured for positive pressure
• Sample flow rate: 0.5 - 5 SCFH; integral flow meter
• Pressure: 0 - 150 psig (10.34 bar). Higher pressures available, consult factory
• Power: 90-230 VAC ±10%, 50-400Hz, cord and ON-OFF switch provided
• Outputs: Analog: 0-5 VDC or 4-20 mA scaled for sensor
• Compliance: 9.0VDC, 450 ohms
• Serial: RS-232
• Alarms: Audible: >98 dba at 2 ft.
• Relay: 1 Form C, non-latching 10 A at 240 VAC, 8A at 24 VDC, 1/2 HP at 240 VAC
• Visual: Flashing “ALARM” message
• Weights & Dimensions:
• Weight: 6 lbs. (2.7 kg)
• Enclosure Dimensions:
• 10.7” (27.3cm) H; 14.0” (35.6cm) W; 6”(15.2cm) D
• Environmental:
• Enamel Coated Steel NEMA-12 (IP52)
• Options:
• Vacuum pump for sample extraction
• Extended range sensors
• RS232 digital output
• Pressure transducer (for gr/lb. or ppmV measurement)
• In-line particulate/coalescing filter
• Remote sensor mounting kit
• Strobe alarm light
• High pressure sensor
• Platinum or stainless steel mirror 

• (1) Edgetech Com.Air Dew Point Monitor
• (1) Instruction Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice