×
Multiple Product

have been added to your cart

There Are items in your cart.

Cart Subtotal: $xxx.xx

Go to checkout

E+E Elektronik EE75 [EE75-T26] Air / Gas Velocity Transmitter, Remote Probe, Pressure-Tight, 10 bar (145 psi)

Not yet rated Write a review
E+E Elektronik

Available Options

Rp.60.413.000
Availability:
4 - 6 WEEKS
Product Code:
EE75-T26
Brand:
E+E Elektronik
Update Terakhir:
22 Sep 2023

  • Free delivery

  • Money back guarantee

Share

The EE75 series air velocity transmitters were developed to obtain accurate measuring results over a wide range of velocities and temperatures.

A high-quality hot film sensor element based on cutting-edge thin film technology ensures maximum sensitivity, even at lowest mass flows. At the same time, the innovative probe design produces reliable measuring results at high flow velocities of up to 40m/s (8000ft/min).
The integrated temperature compensation minimises the temperature cross-sensitivity of the EE75 series which, combined with the robust mechanical design, allows it to be used at process temperatures between -40 to +120 °C (-40 to 248 °F).

In addition to air velocity and temperature values, the transmitter calculates the volumetric flow rate in m³/min or ft³/min. The cross  section of the duct needs to be determined for this purpose and the volumetric flow rate can be displayed and directed to one of the analogue outputs.

The configuration software included in the scope of supply allows to choose the appropriate output parameter and freely scale the display range and signal level of the two analogue outputs. In addition user-friendly calibration of the air velocity and temperature and the adjustment of key parameters (e.g. response time of the velocity measurement, low flow cut-off points, etc.) are supported as well. An optional illuminated display with two control buttons integrated in the cover is available. In addition, this enables changes of the configuration to be made directly on the unit.

The EE75 series has a robust metal housing to protect against possible damage in rough industrial environments. There are four different models, providing a comprehensive range of mounting options:
  • Model A for wall mounting
  • Model B for duct mounting
  • Model C with remote probe
  • Model E with remote probe, pressure-tight up to 10bar (145psi)

The EE75 series can be used to measure the velocity of other gasses as well, although a correction has to be applied to the unit at the factory.

  • EE75 Sensor:
  • Highly accurate over the entire working range
  • Combined v and T measurement
  • Integrated T compensation
  • Optional display with backlight and menu buttons
  • Easy mounting and maintenance
  • Voltage or current output, selectable
  • Low-flow suppression
  • Calculation of volume flow V'
  • EE75 Sensing Head and Probe:
  • Measuring range from -40 °C (-40 °F) up to 120 °C (248 °F) and 10 bar (145 psi)
  • Accurate measurement of air flows from0.06 m/s up to 40 m/s (12...8000 ft/min)
  • Low angular dependency
  • Long-term stable
  • Adjustment and Configuration:
  • v and T adjustment
  • Scalable measuring range
  • Selectable output signal
  • Response time
  • Calulation of volume flow
  • Application Specific Design:
  • Duct mount and remote probe types with different probe lengths
  • Pressure tight remote probes up to 10 bar (145 psi)
  • Various cable lengths for remote probe types
  • Process connection with stainless steel flange or G 1/2" ISO/ 1/2" NPT thread

  • Air Velocity (v):
  • Measuring range:
  • 0...2 m/s (0...400 ft/min)
  • 0...10 m/s (0...2 000 ft/min)
  • 0...40 m/s (0...8 000 ft/min)
  • Accuracy: in air at 25 °C (77 °F) and 1 013 hPa (14.7 psi), including non-linearity, hysteresis and repeatability
  • 0.06...2 m/s (12...400 ft/min)
  • 0.15…10 m/s (30…2000 ft/min)
  • 0.20…40 m/s (40…8000 ft/min)
  • ±0.03 m/s (6 ft/min)
  • ±(0.10 m/s (20 ft/min) + 1 % of mv)
  • ±(0.20 m/s (40 ft/min) + 1 % of mv) mv = measured value
  • Uncertainty of factory calibration:  ±1 % of mv, min. 0.015 m/s (3 ft/min) mv = measured value
  • Dependency:
  • of inflow angle (α): <3 % for α <20°
  • of inflow direction: <3 %
  • Response time t90, typ.:  <1.5...40 s (Factory setting: 1.5 s, configurable via EE75 Configuration Software)
  • Temperature (T):
  • Measuring range: -40...+120 °C
  • Accuracy in air at 25 °C (77 °F) at air flows ≥0.45 m/s (886 ft/min): ±0.5 °C (±0.9 °F)
  • Temperature dependency of electronics, typ.: ±0.005 % of mv/K deviating from 25 °C (77 °F) mv = measured value
  • Temperature dependency of probe, typ.: ±0.1 % of mv/K deviating from 25 °C (77 °F) mv = measured value
  • Response time t90, typ.: ≤10 s
  • Outputs:
  • Analogue: 
  • Two freely selectable and scalable outputs for v, T, V': 0 - 10 V -1 mA < IL < 1 mA IL = load current; 0 - 20 mA / 4 - 20 mA (3-wire) RL ≤ 350 Ω RL = load resistance
  • General:
  • Power supply class III USA & Canada: Class 2 supply necessary: 24 V DC ±20 %
  • Current consumption, typ. With Display: <100 mA; <160 mA
  • Electrical connection: Screw terminals max. 2.5 mm2 (AWG 16)
  • Protection rating; IP65 / NEMA 4
  • Temperature working range: Probe cable:  -40…+105 °C (-40…+221 °F); Enclosure:-40…+60 °C (-40…+140 °F); Enclosure with display: -30…+60 °C (-22…+140°F).
  • Pressure working range: T2, T3:700...1 300 hPa (10.2...18.9 psi); T26:Pressure tight 0.05...10 bar (0.73...145 psi)
  • Humidity working range: 0…95 %RH, non-condensing
  • Storage conditions: -20...+70 °C; 0...95 %rF, non-condensing
  • Material: Enclosure: Die-cast aluminium (AlSi9Cu3); Probe: Stainless steel 1.4404; Probe head: Polybutylenterephtalat (PBT)
  • Electromagnetic compatibility: EN 61326-1 EN 61326-2-3 Industrial Environment; FCC Part15 Class B ICES-003 Class B
  • Configuration and adjustment: EE75 Configuration Software and USB interface cable included in the scope of supply
  • Conformity:  CE; UK CA
  • 1) The accuracy statement includes non-linearity, hysteresis and repeatability.
  • 2) T accuracy: at air flows ≥ 0.45 m/s (886 ft/min)
  • 3) USA & Canada: class 2 supply required

  • (2) Mounting brackets
  • (1) Configuration software and USB
  • (1) Interface cable
  • (1) Users manual

Note: Prices are not binding at any time subject to change without prior notice

  EE75 MODEL 0 Item Selected
Image
Model
Product Name
Price
Available
Quantity
[T26] Remote probe, pressure-tight, 10 bar (145 psi)
T26
Rp.60.413.000
1 Availability
  EE75 OUTPUT 0 Item Selected
  EE75 MEASURING RANGE 0 Item Selected
  EE75 PROBE LENGTH 0 Item Selected
  EE75 CABLE LENGTH 0 Item Selected
  EE75 DISPLAY 0 Item Selected
  EE75 PROCESS CONNECTION 0 Item Selected
  EE75 ELECTRIC CONNECTION 0 Item Selected
  EE75 OUTPUT PARAMATER 1 0 Item Selected
  EE75 LOW SCALE 1 0 Item Selected
  EE75 HIGH SCALE 1 0 Item Selected
  EE75 OUTPUT PARAMETER 2 0 Item Selected
  EE75 LOW SCALE 2 0 Item Selected
  EE75 HIGH SCALE 2 0 Item Selected
  EE75 MEDIUM 0 Item Selected

  • National Delivery

    FREE SHIPPING for all provinces of Indonesia

  • Safe Payment

    Using the most secure payment methods

  • Customer Protection

    From click to delivery.

  • 24/7 Help Center

    Proffessional assistance for a smooth shopping experience.

PT. Indomultimeter Test Instruments

Mall WTC Matahari Serpong UG Fl. U10 Tangsel Banten Indonesia

(+62.21) 53167044
sales@indomultimeter.com