• Intrinsically Safe Noise Dosimeter With Audio Recording
• Bluetooth® 4.0 wireless connectivity
• Airwave App for Mobile devices such as phones and tablets
• Multiple ‘simulated’ dosimeters
• Full color display
• Motion Sensor
• 1 second time history profiling
• Pause function
• Recording of audio events (optional)
• Octave band frequency analysis (optional)
• Updated and Simplified Casella Insight Plug-in with advanced noise analysis features
• Kit Includes: acoustic calibrator, charging base(s) for the number of dBadges in the kit, universal power supply and carry case
• Applications:
• Complete shift exposure measurements
• Task based measurements
• Measurements in accordance with CFR 1910.95.
• Identification of noise sources
• Selection of hearing protection

• Standards: ANSI S1.25:1991 R2007, IEC 61252 Ed 1.1 (2002-3)
• Linear Operating Range: 55.0-140.3 dB (A) RMS
• Peak Measurement Range: 90.0-143.3dB (C or Z weighted),
• Sound Exposure Range: 0.0- 6,100.0 Pa2Hours
• Frequency Weightings: A, C and Z, Type 2
• Time Weightings: Fast, Slow and Impulse
• Exchange Rate: Q=3 or Q=5dB exchange rates
• Threshold and Criterion: 70-90dB in 1dB steps
• Operating Temperature Range: 0°C to +40°C (for <±0.5dB error limit); -10°C to +50°C (for <±0.8dB error limit)
• Ambient Pressure Range: <±0.5dB over 85 - 112kPa,
• Humidity Range: <± 0.5dB over 30% - 90% (non-condensing)
• Storage Temperature Range: -10°C to +50°C
• Battery: Internal NiMH, 800mAH
• Run Time: Typically 35 hours using Broadband Mode
• Typically 15 hours using Octave mode
• Charge Time: <6 Hours from fully discharged
• Maximum Run Duration: 24 hours
• Maximum number of Runs: 100
• Storage Capacity: Internal USD Flash memory - 300 hours of run data (including 1 second profile data) and up to 90 minutes of event audio recording.
• PC Interface: USB 2.0 Full speed 12Mbps via Docking Station.
• Dimensions: 85L x 54W x 55H mm
• Weight: 117g
• Environmental I.P. Rating: IP65 (with permeable air vent)

• (1) dBadge2IS Plus dosimeter
• (1) Windscreen
• (1) Alligator clips
• (1) Pin clips
• (1) Calibration certificate
• All dBadge2 kits are provided with :
• Acoustic calibrator
• Charging base(s) for the number of dBadges in the kit
• Universal power supply
• USB cable
• Insight database software
• Carry case

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice