The BK Precision 9140 Programmable Triple-Output DC Power Supply, 32V/8A features three isolated output channels that each produce 100 W of clean power with low ripple and noise characteristics. Combining all three channels increases the maximum power output to 300 W. Multiple outputs paired with advanced list mode programming, data logging, and protection features make these power supplies suitable for a wide range of benchtop or test system applications. The front panel features a vivid 4.3-inch LCD and output terminals that support sheathed banana plugs or spade lug type connectors. Other features on the front panel include dedicated output control buttons and a USB host port for datalogging. Powerful list mode programming functions enable users to set up and execute complex test sequences directly from the front panel. Individual list programs can be assigned to one or multiple output channels and executed simultaneously or sequentially. Additional list mode features include triggering capabilities for synchronizing outputs or external instruments, and the ability to save/recall list programs using an external flash drive connected to the USB host port. The USB host port is also used for logging voltage and current data to a flash drive at adjustable sampling intervals. This model provides system integrators with a LXI compliant LAN and USB (USBTMC-compliant). The provided LabVIEW, IVI-C, and IVI.NET drivers further simplify system development and integration. In addition to OVP, OCP, and OTP protections, these power supplies support remote inhibit and voltage fault features to protect both the device under test (DUT) and the power supply.