• Measures voltage to 600V AC/DC, AC/DC current and resistance for residential and office maintenance
• Audible continuity quickly identifies shorts and open circuits
• Diode test to verify diode polarity
• Data hold freezes the reading on the display for further analysis
• Auto power-off conserves battery life
• Low battery warning helps avoid losing power in mid-measurement
• CAT III 600V safety rated to handle residential and commercial office applications

AC Voltage:

• Range 2.000 V, 20.00 V, 200.0 V, 600 V
• Accuracy: +/- (1.0 % rdg + 3 LSD), @ 45 Hz to 400 Hz, 2 V to 200 V ranges

DC Voltage:

• Range: 200 mV, 2.000 V, 20.00 V, 200.0 V, 600 V
• Accuracy: +/- (0.8% rdg + 1 LSD) @ 2 V to 200 V ranges

Resistance:

• Range: 200.0 µA, 2000 µA; 20.00 mA, 200.0 mA; 2.000 A, 10.00 A
• Accuracy: +/- (1.2% rdg + 2 LSD)

AC Current:

• Raange: 200.0 µA, 2000 µA; 20.00 mA, 200.0 mA; 2.000 A, 10.00 A
• Accuracy: +/- (1.0% rdg + 2 LSD)

DC Current:

• Range: 200.0 Ω; 2.000 kΩ, 20.00 kΩ, 200.0 kΩ; 2.000 MΩ, 20.00 MΩ
• Accuracy: +/- ( (1.0% rdg + 2 LSD) @ 2 kΩ to 200 kΩ ranges
• Battery test: 1.5V, 9V +/- (1.0% rdg + 3 LSD)
• Ambient temperature: 23°C ±5°C (73.4°F ±9°F)
• Relative temperature: ≤75%
• Maximum voltage between input terminal and earth ground: AC 600Vrms or DC 600V
• Fuse for mA μA input: 0.2A H 250V fast-fuse, (5x20)mm
• Fuse for 10A input: 10A H 250V fast-fuse, (6x32)mm
• Maximum display; 1999, updates 2 to 3/sec

Over-range indication OL

• Range: Automatic
• Altitude:
• Operating ≤ 2000m
• Operating temperature 0°C ~ +40°C (32°F ~ 104°F)
• Relative humidity: 0°C ~ +30°C (32?F ~ 86°F) ≤75%; +30°C ~ +40°C (86°F ~ 104°F) ≤50%
• Storage temperature: -10°C ~ +50°C (14°F ~ 122°F)
• Electromagnetic compatibility: In an RF filed of 1V/m = Specified accuracy °5%
• Battery: 2 x 1.5V AAA alkaline battery or equivalent
• Dimensions (L x W x H): 150 mm x 83 mm x 40 mm (5.9 in x 3.3 in x 1.6 in)
• Weight: Approx. 290g (0.64lb) with batteries installed

DC Voltage Measurement

• Input impedance: around 10MΩ; (Input impedance > 3GΩ for DC 200mV range)
• Overload protection: 600VDC or AC rms

AC Voltage Measurement

• Input impedance: around 10MΩ
• Frequency response: 45Hz ~ 400Hz
• Overload protection: 600VDC or AC rms

Resistance Measurement

• 200Ω range: Measured value = (Measured display value) - (Short-circuiting value of probe)
• Open circuit voltage: around 0.5V
• Overload protection: 600V

Continuity and Diode measurement

• Overload protection: 600V

Battery Test

• Overload protection: F1 fuse, 0.2A H 250V fast-fuse, (Φ5x20)mm
• For 1.5V range: Load resistance is around 30Ω.
• For 9V range: Load resistance is around 1kΩ

• (1) Set Test Leads
• (2) AAA Batteries
• (1) User Manual

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding at any time subject to change without prior notice