• Part Number: 2115.82
• Small, compact size
• Large jaw opening accommodated conductors up to 250MCM
• Designed for DMMs, loggers, recorders and oscilloscopes
• Conforms to IEC1010, 600V, Cat. III

• Operating Range:
• RangeVal: 20A, 200A
• Current Range: 0.1 to 24A, 0.1 to 240A
• Frequency Range: 40 to 10kHz
• Limit Operating Conditions: 200A permanently to 1kHz; Derating above 3kHz: 200A x (1/0.333 F), F in kHz
• Common Mode Voltage: 600VAC
• Crest Factor: 3 @ 200Arms with an error (due to CF) of 3%
• Current Overload: 240A for 10 min
• Reference Conditions: 20° to 26°C, 20 to 75% RH, 48 to 65Hz, external magnetic field <40A/m, 48 to 65Hz sine wave, distortion factor less than 1%, no DC component, no external current carrying conductor, test sample centered. Load impedance 1MW
• Working Voltage: 600VAC
• Influence of Adjacent Conductor: 
• Range Value: 50Hz
• Influence of Adjacent Conductor: < 15mA/A
• Influence of Conductor Position:
• Influence of Conductor Position: 0.5% of Reading @ 50/60Hz
• Influence of Frequency:
• Range: 20A, 200A
• Range Value: 40Hz to 1kHz, 1 to 10kHz, 40Hz to 1kHz, 1 to 10kHz
• Influence of Frequency 5% of mV output, 15% of mV output, 3% of mV output, 12% of mV output
• Influence of Humidity:
• Influence of Humidity: 13 - 90% RH: £0.2% of mV output per 10°K @ 18°C to 28°C
• Output Signal:
• Range Value: 20A, 200A
• Output Signal: 100mV/A, 10mV/A
• Mechanical Specifications:
• Altitude: Operating: 0 to 2000m; Non-operating: 0 to 12km
• Colors: Dark gray handles with red cover
• Dimensions: 5.47 x 2.00 x 1.18" (139 x 51 x 30mm)
• Drop Test: Test per IEC 68-2-32: 1.0 m drop on 38 mm of Oak on concrete
• Jaw Opening: .84" (21mm)
• Material:  Jaws: Polycarbonate with 10% fiberglass charge, Red UL 94 V0; Case: Polycarbonate
• Maximum Bus Bar Size: 0.78 x 0.19" (20 x 5mm)
• Maximum Cable Diameter: One 0.78" & Oslash; (20mm)
• Mechanical Shock: 100g per IEC 68-2-27
• Operating Temperature: -14° to 131°F (-10° to 55°C)
• Operating Relative Humidity: 10° to 35°C 85% RH (without roll-off above 35°C)
• Output: Insulated 6.5 ft (2m) coaxial cable with insulated BNC connector rated 600Vrms
• Protection Index (IP): IP 40 (IEC 529)
• Impact Test: IK04 0.5 J EN50102
• Storage Temperature: -40° to 158°F (-40° to 70°C)
• Vibration: Test per IEC 68-2-6
• Weight: 6.5 oz (180g)
• External Influences: 
• Influence of Temperature:£150 ppm/°K, or 0.15% of mV output per 10K°
• Safety Reference Specifications:
• Safety Ratings: EN 61010-2-32

• (1) MN261 [2115.82] Oscilloscope & BNC Terminated Probe
• (1) Manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice