• Part Number: 2120.81
• 24" flexible sensor fits around conductors up to 7.6" in diameter
• Dual measurement ranges of 300A and 3000AAC
• Read amperage directly on DMM display
• mV output directly proportional to the AC current measured
• Output is 10mV/A on 300A range and 1V/A on 3000A range
• Accuracy of 1% of Reading ± 500mA
• 4% influence of conductor position in jaw
• Up to 300 hours battery life
• Dual banana plug termination for direct input into DMMs
• EN 61010, 1000V, Cat. III, Pollution Degree 2
• Flashing LED low battery indicator

• ELECTRICAL: 
  
• Current Range: 300/3000Aac
• Three Position Slide Switch; 5A to 300Arms, 50A to 3000Arms
• AC Current Accuracy: 1% of Reading ± 500mA
• Crest Factor: 4.5
• Phase Shift: <0.7° at 50 or 60Hz
• Frequency Range: 40 to 5kHz
• Working Voltage: 1000Vrms max (Cat. III)
• Common Mode Voltage: 600Vrms max
• Power Source: 9V alkaline (NEDA 1604A, IEC 6LR61)
• Battery Life; 150 hours typical (continuous use), 300 hours with lithium battery
• MECHANICAL:
• Dimensions: 4.9 x 2.5 x 1.1" (124 x 64 x 28 mm)
• Weight (with battery): 1.1 lbs (0.5 kg)
• Maximum Conductor Size; 7.6" (193 mm)
• Sensor Length: 24" +- 1" (610 mm +- 25.4 mm)
• Cable Length: 6.5 ft (2 m)
• Output: Double insulated 14" (36 cm) lead with safety banana plugs
• ENVIRONMENTAL:
• Operating Temperature: 14° to 131°F (-10° to + 55°C)
• Storage Temperature: 40° to 70°F (-40° to + 158°C)
• Operating Relative Humidity: 50° to 86°F (10° to + 30°C)
• 85 to ±5% RH (non-condensing), 104° to 122°F (40° to 50°C), 45 to ±5% RH (non-condensing) 85 to ± 5% RH (non-condensing):  104° to 122°F (40° to 50°C), 45 to ±5% RH (non-condensing)
• SAFETY:
• Rating: EN 61010, 1000V, Cat. III, Pollution Degree: 2
• CE Mark: Yes

• (1) 24.3001 FlexProbe
• (1) 9V Battery
• (1) User Manual

Brochure/Datasheet

Instruction Manual

Download

Prices are not binding , subject to change without prior notice