AARONIA HyperLOG 7060 X BPA [HYPERLOG 7060 X BPA] Active Directional Antenna, 700MHz - 6GHz, with UBBV 1060 Bypass Pre-Amplifier

Rp.34,500,000
- Availability:
- 4 - 6 WEEKS
- Product Code:
- HYPERLOG 7060 X BPA
- Brand:
- Aaronia
- Update Terakhir:
- 13 May 2017
-
Free delivery
-
Money back guarantee
The Aaronia HyperLOG7060XBPA Active Directional Antenna, 700MHz - 6GHz, with UBBV 1060 Bypass Pre-Amplifier is an ultra high gain active directional antenna. Every HyperLOG antenna goes through rigorous testing in our laboratories before dispatch and is equipped with a high quality gold coating, a high-tech antenna-case (radome) which offers protection against mechanical damage and environmental influence, a top-quality integrated tripod connection and an SMA connector (18GHz version) with twist protection. This model includes the UBBV 1060 External Bypass Pre-amp 100 MHz - 6 GHz, which features internal batteries (with typical run-time of 3-4 hours) and excels at "digging out" weak signals to improve signal analysis even with outdated spectrum analyzers. With internal switching to allow the pre-amp to handle both high and low signals, users can easily change the operation mode from the "Standard" pre-amp function to "Bypass" mode, bypassing low noise amplification functions when large signals are present.
Tags:
- Compatible with any Spectrum Analyzer brand
- Design: Active directional Logarithmic-periodic
- Includes External Bypass Amplifier UBBV 1060 BPA
- Low noise pre-amplifier with bypass mode and ultra-high IP3
- Gain: 22dB at 2GHz
- Noise: 1.4dB at 2GHz
- 8 hours battery run-time
- Frequency range: 700MHz to 6GHz
- Nominal impedance: 50 Ohm
- VSWR: <1:2 (typ.)
- Gain: 45dBi (typ.)
- Antenna factor: 26-41dB/m
- RF connection: SMA (f) or N (see optional adapter)
- Tripod connection: 1/4 in.
- Gold-coated high tech Teflon material
- Interface: USB 2.0/1.1
- Calibration points: 533 (10MHz-steps)
- Polarization: linear vertical/horizontal
- Dimensions (L/W/D): 340x200x25mm (13.4 x 7.9 x 1 in.)
- Weight: 400gr (.88 lbs)
- Includes External Bypass Amplifier UBBV 1060 BPA
- Low noise pre-amplifier with bypass mode and ultra-high IP3
- Gain: 22dB at 2GHz
- Noise: 1.4dB at 2GHz
- 8 hours battery run-time
- Design: ACTIVE directional Logarithmic-periodic
- Frequency Range: 700MHz-6GHz
- Preamp Noise: Linear increase, 100MHz: 3,5dB, 3GHz: 4dB, 6GHz: 4,5dB
- Preamp Gain (typ.): Linear fall-off. 1MHz: 40dB; 3GHz: 37,5dB; 6GHz: 35dB
- Nominal impedance: 50 Ohm
- VSWR (typ.): <1:2
- Gain (typ.): 45dBi
- Calibration Points: 533 (10MHz-Steps)
- RF-Connector: SMA-Connector (18GHz) or N-Connector via Adapter
- Tripod connection: 1/4"
- Interface: USB 2.0/1.1
- Dimensions (L/W/D): 390x200x25 mm
- Weight : 400g
- Warranty: 2 Years
- (1) HyperLOG 7060 X
- (1) Power Supply
- (1) UBBV1060 Internal Bypass Preamplifier
- (1) Calibration Data on Eeprom (readout via USB)
- (1) Typical Calibration Data with 211 Calibration Points on CD
- (1) Aluminum Carrying Case
- (1) Pistol Grip with Mini Tripod Function
Instruction Manual
Download
Note: Prices are not binding at any time subject to change without prior notice