TECHNO-AC Success AG-309.15N [SUCCESS AG-309.15N] Pipe and Cable Locator

This Operation manual contains description ofthe cable and pipe locatorSuccess AG-309.15N, its working modes, and information necessary for its proper use. АP-019.3 (hereinafter «the receiver») can be used and a individually, and with the transmitter. The receiver works at the networks frequencies 50(60) Hz, 100(120) Hz, and with route locating transmitters at frequencies 512Hz, 1024 Hz, 8192 Hz, 32768 Hz (33 kHz).

Receiver working principle
The cable and pipe locator success AG-309.15N, working principle is based on the analysis of the electromagnetic field, created by the alternative current flowing through communications. The electrical signals induced in the receiver sensors are amplified, filtered, processed by the processor and displayed on the graphical display in the form of the communication position line, linear scale, andthegraphicofthe signal level change,digital value o fthe signal level amplification coefficient, distance to the communication axis, the value of the current flowing through it, and other parameters.

Features:

---

• Monoblock receiver AP-019 with built-in GPS/GLONASS module (option)
• 20W AG-105 transmitter
• high precision location of underground utilities up to 10m
• direct digital measurement of cable current up to 10 amperes
• Location of non-conductive and non-metallic utilities with optional pushing rod and pipe sonde

---

Brief description:

---

• Three modes of operation : "ROUTE”, "GRAPHIC”, “FRIEND-OR-FOE”
• Three inbuilt sensors make omnidirectional antenna showing a direction of a cable or a metal pipeline

      on LCD display

• Inbuilt sensor for digital measurement of the depth and current
• Mmeasured depth is 10 m
• Passive frequency: Power, Radio, BB
• Active frequency: 512/1024/8192/32768 Hz
• Sensitivity : 100μA
• Large LCD display with high resolution and adjustable backlight brightness
• Transmitter – 20W
• Cast body, the case is sealed along the entire length to the connectors
• GPS/GLONASS module for accurate positioning of the located utility (option)
• Mini-USB cable and desktop software for uploading and processing the data from the receiver.

---

Application:

---

• Detection of cables and any metal pipelines underground up to 10 m
• Direct digital measurement of the depth up to 10 m
• Indication of the deviation from the utility axis in the mode “ROUTE”
• Direct digital measurement of the current
• Survey the ground before the excavation works
• Distance of tracing from the place of transmitter connection is up to 3 km

What's In The Box:

---

• (1) Receiver АP-019
• (1) Transmitter АG-105
• (1) Power connection cable AG120.02.080
• (1) External power supply cable AG120.02.070
• (1) Grounding rod
• (1) Grounding cable
• (12) Battery alkaline R14
• (1) Contact magnetic
• (1) Set carrying bag
• (1) Receiver bag
• (1) Operation manual
• (1) Technical passport

Brochure/Datasheet

---

Instruction manual

Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu