Name: Panametrics IQ.probe [IQ.probe-2W0000-0] Aluminum Oxide Moisture Probe, 3/4 inch, Sheet Stainless Steel End-cap/shield, -80 to 10°C Dew/frost Point (Data Programmed from -110 to 20°C)
Brand: Panametrics
Price: 84836000 IDR
Availability: OutOfStock

Panametrics IQ.probe [IQ.probe-2W0000-0] Aluminum Oxide Moisture Probe, 3/4 inch, Sheet Stainless Steel End-cap/shield, -80 to 10°C Dew/frost Point (Data Programmed from -110 to 20°C)

0 reviews • Write a review

from

Rp.84,836,000

Brand: Panametrics
Part Number: IQ.probe-2W0000-0
Availability: 8 - 10 Weeks
Last Updated: 26 May 2026

Panametrics

Qty

Add to Cart

Add to Wish List Compare this Product

Tags: Panametrics IQ.probe , Aluminum Oxide , Moisture Probe

Description

The Panametrics IQ.probe [IQ.probe-2W0000-0] is an intrinsically safe, thin-film aluminum oxide moisture sensor designed for accurate, real-time absolute humidity measurement in industrial gases. It features a built-in micro-processor, self-calibration, and onboard nonvolatile EEPROM memory that stores exact calibration data. The Panametrics IQ.probe (IQprobe2W00000) is an advanced, intrinsically safe moisture sensor that measures trace-to-ambient moisture in gases and non-aqueous liquids. It uniquely stores calibration data digitally, eliminating the need for shielded cables.

The Panametrics IQ.probe Aluminum Oxide Moisture Probe measures moisture concentration in gases from trace to ambient levels. It is designed to be used in conjunction with the Panametrics dew.IQ analyzer in applications for industries including: Industrial gas, Furnace gas/heat treating, Power generation, Air dryer, Pharmaceutical, Aerospace. Panametrics aluminum oxide moisture probes have set the standard of performance and value in industrial moisture measurement for more than 40 years. The IQ.probe is coupled to the Panametrics dew.IQ hygrometers by an interconnecting cable. Ease of use, wide measurement range and rigorous calibration standards make these systems the preferred choice for industrial moisture measurement worldwide. The real power of the IQ.probe comes from an electronics module that is attached to the moisture sensor probe. The 16 bit resolution allows it to detect parts per billion changes in moisture concentration. The electronics are self-calibrating ensuring long-term stability. Sensor calibration data is stored in a nonvolatile EEPROM, so data entry to the dew.IQ is automatic. The aluminum oxide sensor is individually calibrated in one of the world's most advanced moisture calibration facilities. Developed over several decades, this facility generates precisely known moisture concentrations, traceable to national standards. Data is gathered and stored by a dedicated computer system. Calibrations are repeated over a period of many months to ensure the stability of each individual moisture probe. Only those probes that meet Panametrics's demanding specifications for accuracy and stability are shipped to customers. The IQ.probe is designed to be located at the process, exactly where the measurement is needed. The sensor can withstand process temperature excursions up to 70°C and process pressures from vacuum up to 5000 psig (345 bar). No minimum flow rate is required. The probe can be located up to 3000 feet (0.9 km) from the analyzer, connectedby inexpensive, unshielded, twisted-pair cable (AWG 22). As a result, the probe can be placed in the ideal location, without the cost, delays and installation problems associated with special cabling.

Panametrics IQ.probe [IQ.probe-2W0000-0] Aluminum Oxide Moisture Probe, 3/4 inch, Sheet Stainless Steel End-cap/shield, -80 to 10°C Dew/frost Point (Data Programmed from -110 to 20°C)

PT. Indomultimeter Test Instruments