Gratis Pengiriman
Support Handal
Dapatkan penawaran gratis
0 item(s) - Rp.0 0

  • Daftar belanja Anda kosong!

0

GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software

GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
GE Panametrics MTS6 [MTS6-3-4-1-0] OEM Panel Mount Moisture Analyzer Board 230/240 VAC w/Standard Software
0 ulasan • Tulis ulasan
from
Rp.92.800.000
Sebelum Pajak: Rp.92.800.000
GE Measurement & Control GE Measurement & Control
+ Keranjang
Tambah ke Favorit Bandingkan produk ini
Tags/penandaan: GE , TransPort , Tansducers , Pipes , Ultrasonic Flow Meter

The GE Panametrics Moisture Target Series 6 is a single-channel analyzer that measures moisture in compressed air and gases. Designed for permanent installations the MTS6 can significantly enhance the performance of OEM products by allowing closed-loop control of moisture. It is used in conjunction with M Series moisture probe or VeriDri moisture transmitter for air/gas dryer original equipment.

The microprocessor-based MTS6 accurately tracks fast-changing process conditions and displays dew/frost point temperature in °F or °C on an LCD. Dew/frost point is also available as an analog voltage or current output, and the Moisture Target Series 6 features built-in isolation to ensure the integrity of signals to remote devices. The unit also features two Form C alarm relays for high and low dew/frost point limits. The microprocessor-based electronics and six-button keypad combine to make selection of analog output zero and span, alarm setpoints fast and easy, and entry of calibration data sample.

The panel-mount MTS6 comes in a compact DIN standard meter housing for applications where space is at a premium. The case slides directly into the panel cutout, and is held in place from the rear by captive screws.

Features:

  • Low-cost, single-channel hygrometer for OEM applications
  • Compatible with M Series moisture probe or VeriDri moisture transmitter
  • NEMA 4 weatherproof membrane front display/keypad
  • Built-in isolated current or voltage analog output
  • MicroSD card for logging data up to 32 GB
  • Panel-mount and board-level configurations
  • Alarm Relays
    • One fail-safe fault relay
    • Two standard Form C relays SPDT, rated for 3 A at 250 VAC/30 VDC
    • Set to any level within the range of the instrument; programmable from the front panel
  • 128 x 64 matrix LCD display
  • Displays dew point temperature in °F, °C or sensor signals for diagnostics
  • Standard switch-selectable outputs
    • 0 to 2 V, 10kΩ minimum load resistance
    • 0 to 20 mA, 400Ω maximum series resistance
    • 4 to 20 mA, 400Ω maximum series resistance
    • User-programmable within the range of the instrument and the corresponding sensor or transmitter
What's In The Box:
  • (1) Power Supply
  • (1) Instruction manual 
  • (1) Transducer cable
  • (1) Couplant
  • (1) Traceable calibration certificate
  • (1) Moisture Probe (OPTIONAL)

Brochure/Datasheet


Instruction manual

    Catatan: Harga tidak mengikat, sewaktu waktu bisa berubah tanpa pemberitahuan dahulu