• Measurement range from 500 mA AC to 3,000 A AC
• Single or bi-calibre
• Bandwidth of up to 1 MHz
• 3 clamping diameters: 45 mm, 70 mm and 100 mm
• 600 V CAT IV / 1,000 V CAT III

• ELECTRICAL SPECIFICATIONS (1):
• Operating voltage: 600 Vrms (Cat. IV), 1,000 Vrms (Cat. III)
• Battery: 9 V alkaline battery (NEDA 1604A, IEC 6LR61)
• Battery life: 100 hours typical
• Typical consumption: 3.6 mA typical
• Battery level indication: Green LED when > 7.0 V approx.
• Influence of battery voltage: ≤ 0.1% from 9 V to 7 V
• Influence of temperature: ≤ 0.2% / 10 °K
• Influence of humidity: ≤ 0.5% from 10 % to 90 % RH without condensation
• Influence of conductor position in the sensor (8): ≤ 2.5%
• Influence of sensor deformation (6): ≤ 1%
• Influence of an adjacent conductor with circulating AC current (7): ≤ 1.5% or 36.5 dB
• Common mode rejection: - between enclosure and secondary: ≤ 75 dB, - between sensor and secondary: ≤ 80 dB
• Influence of the measurement instrument’s impedance Z: 0.1% / Z (in MΩ)
• MECHANICAL SPECIFICATIONS:
• Clamping capacity: Model 170 mm: Ø max 45 mm, Model 250 mm: Ø max 70 mm
• Operating temperature: -10 °C to +55 °C,
• Storage temperature: -40 °C to +70 °C
• Max. temperature of clamped conductor (measured): ≤ 90 °C
• Relative humidity for operation: 0 to 85 % RH with a linear decrease above 35 °C
• Operating altitude: 0 to 2,000 m
• Storage altitude: ≤ 12,000 m
• Casing protection rating (leakproofing): Casing: IP50
• Sensor: IP50
• According to EN 60529/A1 Ed. 06/2000
• Shock resistance: IK04 according to NF EN 50102 Ed. 1995
• Self-extinguishing capability: Casing: UL94-V2, Sensor: UL94 V0
• Dimensions: Casing: 140 x 64 x 28 mm
• Connector lead: 2 m (connects sensor to casing), Ø of sensor: 5.5 mm approx.
• Connection cable Ø: 3 mm approx.
• Colours: Sensor: red, Sensor closing system: dark grey, Sensor locking tab: yellow, Casing: Dark grey
• Output: According to model: Coaxial cable 40 cm long, terminated by an insulated BNC plug
• SAFETY SPECIFICATIONS:
• Electrical safety: Class II equipment with double or reinforced insulation between the primary and the secondary (winding connected to the connection cable) as per  EN 61010-1 and 61010-2-032: - 1,000 V Cat. III, pollution degree 2, - 600 V Cat. IV, pollution degree 2, - Type-B sensor, - 600 V Cat. III between the BNC output and the external enclosure of the casing
• Electromagnetic compatibility (EMC): Complies with the IEC 61326 (Ed. 1997) + A1 (Ed. 1998), Adequate immunity to disturbances for industrial, environments, Adequate immunity to disturbances for residential environments
• (1) Conditions of reference: 23 °C ± 5 °K, 20% to 75% RH; Battery voltage: 9 V ± 0.5 V; Continuous external DC magnetic field (earth field) < 40 A/m; Absence of external AC magnetic field; External electrical field < 1 V/m; Position of conductor measured: centred in the measurement coil; Shape of measurement coil: quasi-circular; Measurement instrument input impedance (oscilloscope) ≥ 1 MΩ; Frequency and form of signal measured: 40 to 400 Hz sinusoidal.
• (2) Measurement range for the specifications indicated in this document.
• (3) Rise Time (rt)
• (4) Fall Time (ft)
• (5) Delay Time (dt)
• (6) Oblong shape
• (7) Adjacent conductor 1 cm from sensor; ≤ 3% or 30.5 dB near click-lock system
• (8) ≤ 6% near click-lock system
• (9) Typical curve obtained by mathematical modelling

• (1) MA200 - AC Current Probe
• (1) Sensor 
• (1) 9 V battery
• (1) User manual in 5 languages
• (1) Verification certificate

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice