Shop by Brand
Clamp Meters
Datacom and Networking
Ground Tester
Hand Tools
HVAC Equipment and Instruments
Life Sciences Equipment
Megohmmeter
Multimeters
Oscilloscopse
Power Measurement
Power Supplies
Power Tools
Process / Calibration
Safety Testing / Surge Testing
Safety Equipment
Signal Generators / Counters
Soldering Equipment
Spectrum Analyzers
Surveying Equipment
Thermal Imagers
Merk
Katalog
Test Equipment
Inspector Tools
Environmental
Power Tools
Your shopping cart is empty!
![HANNA Instruments Combo Gro’chek HI991404 [HI-991404] pH / TDS / Temperature (Low Range) Meter](image/cache/wp/gj/Products/HANNA_HI991404-2-800x800.webp "HANNA Instruments Combo Gro’chek HI991404 [HI-991404] pH / TDS / Temperature (Low Range) Meter")
The HI-991404 has been engineered to continuously monitor pH, TDS (0 to 2000 ppm) or EC (0 to 3999 µS/cm) and temperature. This microprocessor based meter feature a large, dual level, backlit LCD to give instantaneous readings of pH, EC or TDS and temperature. Optimized for hydroponic and greenhouse applications, the meter housing and cable connections have been sealed against vapor and humidity and all the necessary measuring probes are supplied with purchase.
The HI991404 is a simple way to measure pH, TDS (0 to 2000 ppm) or EC (0 to 3999 µS/cm) and temperature. Installation is easy; simply hang the meter right above the sample to be tested for continuous measurement, plug the instrument to the mains, immerse the probes and the unit will run without interruption on 12 VDC power supply. The large, dual-display LCD screens show pH, TDS or EC and temperature readings simultaneously. Designed for use in greenhouses and horticultural applications, this meter is waterproof and protected against the ingress of dust and particles.
The meter is supplied with a HI1293D pre-amplified pH electrode with a PEI body and DIN connector. The amplifier for the pH electrode prevents interference from humidity and sources of electrical noise include circulating pumps, motors, and ballasts for grow lights. The polyethylenimine (PEI) protective body protects against most aggressive chemicals as seen in fertilizer solutions with high concentrations of phosphate and nitrate.
The fixed conductivity probe, HI7630 2-pin amperometric features a built-in temperature sensor, 2m (6.6’) cable and protective sleeve to resist most aggressive chemicals.Calibration and temperature compensation are automatic, while the EC/TDS conversion factor and temperature coefficient (β) are user adjustable for application specific measurements. Additionally, both the HI1293D pH electrode and HI7630 conductivity probe have been molded with pipe thread (1/2’’ NPT), which allows the user to attach them to an in-line system.
By completing profiles, we can ensure you get the best service
